Electronic clutch slip....

[rajvr497]

Hey guys I purchased a clutch slip for my vr4 for racing purposes....for the guys here that dig up alot with these ecu is there a way I can wire it into the ecu to activate only at stand still?
For e.g.....the way KSmods launch control works.
I need to activate it only at stand still when I'm launching the car....

[rajvr497]

????

[Confused]

I'm not sure what exactly it is you've purchased! Can you provide us with a link to the product you've bought?

If you've got a manual, then any clutch slip for launching is down to your left foot, and if you've got an auto, there's no clutch anyway!

[Davezj]

i was not sure what was being asked here either.

[rajvr497]

magnusmotorsports.com/products/clutch-products-services/launch-control-device/

http://magnusmotorsports.com/products/clutch-products-services/launch-control-device/

[Confused]

I don't believe that there are currently any outputs from the ECU that can be controlled for this.

Your easiest option would probably be to have a push-to-make button which you must press to enable this - without the button pressed, it is disabled.

[Davezj]

Is there an option on the ECU to switch on the launch control via a input switch on the dash,
Reather than a clutch switch on the pedal.
If so could the same switch trigger this clutch slipper.

Just a though.

Sent from my MI 5s using Tapatalk