Engine bay parts

[peter thomson]

Working in engine bay at present stripping engine.

AYC/TCL ecu £10 also ayc only ECU £10
Ignition coil £10
Throttle bodies auto complete £10
Throttle body manual I believe complete £10
Inlet manifold £5
rear wiper motor £10
Front Wiper motor £15
Steering rack £80
Steering column £20
Air flow meter £70
Alternator 100A I think £60
sarter motor £25
Set of energy suspension polyurethane engine mounts £60
mnual radiator and fans £40
Automatic radiator and fans £40
PFL foglights pair no covers £15

cam position sensor £30
Crank position sensor £25
Fuel rail adapter if you are fitting a non oem fuel pressure regulator £5
pair of UK glass headlamps and indicators £50
IFS (ignition fail sensor) handy to keep in glovebox - I have 2 or 3 of these £10
ABS pump £20
Brake cylinder and servo £20
More to add later with pics of some parts. Let me know if you need any specific parts

[Stubydoo]

Hi I am interested in the tcl solenoids if they are all working ok!?


Sent from my iPhone using Tapatalk

[peter thomson]

Hi I am interested in the tcl solenoids if they are all working ok!?


Sent from my iPhone using Tapatalk

They were both new not that long ago and a bargain at the price compared to new from viamoto

[Stubydoo]

Ok cool definitely want them as mine have started throwing the tcl light and engine management light on!
How do I go about payment etc?


Sent from my iPhone using Tapatalk

[lancerevo3]

Fuel rail link,pcv valve and the oil cap delivered to cork Ireland please.
Send me your PayPal address Peter.

[Judder]

Put me down for the IFS (ignition fail sensor) please :)

[peter thomson]

Put me down for the IFS (ignition fail sensor) please :)

Still want this, I did pm you?

[peter thomson]

More parts added

[Judder]

Still want this, I did pm you?

Hi Peter - sorry! I think I missed that :)

I'll PM you back but yes please :)

[Pentagram]

I'll take the sump, please

Sent from my Phone using Tapatalk

[peter thomson]

I'll take the sump, please

Sent from my Phone using TapatalkNo problem ,should have it removed this weekend

Sent from my HTC One_M8 using Tapatalk

[peter thomson]

Any interest in cams for regrind exchanges or the heads as I don't plan on keeping them too long

[peter thomson]

Updated and more added

[peter thomson]

bump

[peter thomson]

Any interest in cams for regrind exchanges or the heads as I don't plan on keeping them too long

bump to these before I take them to the metal scrap

[peter thomson]

added some stuff, engine mounts are now removed

[peter thomson]

More stuff added

[menno3x8g]

Will you send to the Netherlands?
I would like to have:

AYC/TCL ecu £10
Ignition coils £25 for a set
Throttle bodie auto complete £10
Air flow meter £70
Cam position sensor £30
Crank position sensor, nearly new £30
A set TCL solenoids £15 pair
IFS (ignition fail sensor) £10

TIA

[peter thomson]

Will you send to the Netherlands?
I would like to have:

AYC/TCL ecu £10
Ignition coils £25 for a set
Throttle bodie auto complete £10
Air flow meter £70
Cam position sensor £30
Crank position sensor, nearly new £30
A set TCL solenoids £15 pair
IFS (ignition fail sensor) £10

TIA
I'll get them boxed up and back to you with a delivery cost this weekend

[peter thomson]

bump

[peter thomson]

Reduced some parts in first post

[Pentagram]

Ignition coils £25 for a set - have you still got these? If they're decent and not wrapping in tape I'll take them. [emoji23]

Sent from my Phone using Tapatalk

[peter thomson]

Ignition coils £25 for a set - have you still got these? If they're decent and not wrapping in tape I'll take them. [emoji23]

Sent from my Phone using Tapatalk

Lol I'll need to check what I have left

[peter thomson]

Ignition coils £25 for a set - have you still got these? If they're decent and not wrapping in tape I'll take them. [emoji23]

Sent from my Phone using Tapatalk

Can only find one more. May have some in our other spare engine. Should have this checked next week

[peter thomson]

AYC/TCL ecu £10 also ayc only ECU £10
Ignition coil £10
Throttle bodies auto complete £10
Throttle body manual I believe complete £10
Inlet manifold scrapped
rear wiper motor £10
Front Wiper motor £15
Steering rack £70
Steering column £20
Air flow meter £70
Alternator 100A I think Sold
starter motor £25
mnual radiator and fans £40
Automatic radiator and fans £40
PFL foglights pair no covers £15
cam position sensor £30
Crank position sensor £25
Fuel rail adapter if you are fitting a non oem fuel pressure regulator £5

IFS (ignition fail sensor) handy to keep in glovebox - I have 2 or 3 of these £10
ABS pump check part number as a have a few £15
Brake cylinder and servo £20
More to add later with pics of some parts. Let me know if you need any specific parts

[Jsa274]

Hi Peter, do you still have the fuel tank purge solenoid valve? I would also be interested in the fuel purge canister if you still have it.

[peter thomson]

Hi Peter, do you still have the fuel tank purge solenoid valve? I would also be interested in the fuel purge canister if you still have it.

They have both gone I'm afraid

[peter thomson]

Compressor pics

[ATatar]

bump

Hi Peter

Would you let me know the postage cost for the inlet manifold please? Think this will be an easier and cheaper option than stripping the paint off my current inlet!! I’m in the U.K., I can pm you my address if needed for the quote.

Thanks, Alex

[ATatar]

Just see you scrapped inlet!! Sorry, didn’t read ahead!

[peter thomson]

Just see you scrapped inlet!! Sorry, didn’t read ahead! Yep gone I'm afraid

[jaspa]

Just see you scrapped inlet!! Sorry, didn’t read ahead!

I have one that you are welcome to if you can collect it from Horley (just outside Gatwick).

Stuart

[ATatar]

I have one that you are welcome to if you can collect it from Horley (just outside Gatwick).

Stuart

Hi Stuart, yes please that would be great! I have the odd mr2 (mk2) part laying around, anything you’re after? If I have it we could do a swap!
Thanks, Alex

[jaspa]

Hi Stuart, yes please that would be great! I have the odd mr2 (mk2) part laying around, anything you’re after? If I have it we could do a swap!
Thanks, Alex

I've been out of the MR2 game for over a year now, I've opted for a slightly different pace of life with a Mitsubishi Delica but you're welcome to the manifold. I'll dig it out over the weekend and drop you a message (to avoid hijacking this post any further, sorry Peter). I've probably got some other bits and bobs that you can help yourself to too.

Stuart

[ATatar]

I've been out of the MR2 game for over a year now, I've opted for a slightly different pace of life with a Mitsubishi Delica but you're welcome to the manifold. I'll dig it out over the weekend and drop you a message (to avoid hijacking this post any further, sorry Peter). I've probably got some other bits and bobs that you can help yourself to too.

Stuart

Sounds great, thank you. And yes messenger is a good idea, (sorry Peter!). Speak soon - Alex

[Ranek]

Still have the auto radiator?

[peter thomson]

Still have the auto radiator?

yes.

[Ranek]

yes.

Do you have any pics of it? Current one is crap and as I've got to replace a bunch of other cooling system stuff might as well get the rad sorted too.

[VR4Billy]

I’d like to purchase the Ignition coil, can you send my payment details including postage within the UK?

[Speedwaybob]

I know it's a engine bay thread but I'm desperate, don't have any interior bits do you?

[peter thomson]

bump

[Davezj]

Do you still have the camshafts Peter if so I will take these.

[peter thomson]

Do you still have the camshafts Peter if so I will take these.

Scrapped I'm afraid

[Davezj]

Ok never mind, just thought I would ask.
I am going to try and creat my own cam reginfs and probably need to practice the setup on the grinding machine I am going to build.

[Fauli]

Does one of the ThrottleBodies have 3 vacuum pipes on top?

[peter thomson]

Does one of the ThrottleBodies have 3 vacuum pipes on top?

They do

[Pwhite]

Morning, I know this is an old post but just wondering if you still have the inlet manifold and throttle body available? Thanks

[paulbonner84]

Are the engine mounts still for sale ?

[ianturbo]

Do you still have the throttle bodies ?

Sent from my SM-G780F using Tapatalk

[metaripley]

I'm interested in the poly engine mounts if there still available and a IFS.
Maybe they can be shipped together with the things of menno?

[TARIQ]

Anything still available. Looking for airflow