PDA

View Full Version : How quick legnum could be fast in accelerating 100-200



Asmter
12-04-2020, 05:06 PM
I welcome all. My legnum has the following mods:
Tf035hmx2 turbine (size 70% of TD04l)
pressurization pressure 22psi
Manual transmission
Yesterday I drove 100-200 in 11.8 seconds. Is it quick for the legnum?
https://i111.fastpic.ru/thumb/2020/0411/4f/_17146553639e286ebc4df9a17a8e6f4f.jpeg (https://fastpic.ru/view/111/2020/0411/_17146553639e286ebc4df9a17a8e6f4f.jpg.html)

adaxo
12-04-2020, 06:50 PM
Hi on which gear you measure that?

Asmter
12-04-2020, 06:56 PM
3-4-5 :(

adaxo
12-04-2020, 08:10 PM
I think this measurement to be comparable between other vr4s needs to be done in one gear as every one shift differently. I would suggest 4th gear.

Asmter
12-04-2020, 09:01 PM
I ain't got logs. But i feel that after 180km/h aerodynamics drag back me. I need to know, does everybody have that feeling?

Nick Mann
12-04-2020, 10:19 PM
It sounds quick to me. I suspect aerodynamics don't help, but the drag coefficient is not that bad I don't think?

Davezj
17-04-2020, 01:04 AM
on a standard PFL 0.7ish bar TD03 turbos my car would not go any quicker than 147 mph on a private rd, 5500rpm in 5th (auto).
not sure if this was aero drag or just run out of boost pressure.
now we all know the engine will rev up to 7250rpm in all other gears so there is no reason why it is not possible to do this in 5th gear as well.

adaxo
17-04-2020, 09:57 AM
Im pretty sure we talking about kilometres per hour, very common test on youtube channels to compare cars, usually done on one gear to eliminate driver shifting factor. For those with utcompm, we can set this in settings so measurement start and stop automatically and give you very accurate readings straight away

Davezj
17-04-2020, 07:37 PM
oh right i see.