Ecuflash error?

[FTunedAU]

Plugged in my Tactrix today to download yhe tune and to look at fuelling. The tune is one that I've done myself and uploaded about 8 weeks ago.

Same cable same software, is nothing has changed.

Downloaded the tune, did my changes and now its not allowing me to upload? Test write webt fine but not the real one.

Log says:
Kernel flash enable
Kernel blank flash page: addr: 00011000
Kernel error: programming failure
Warning: failed to erase pages at 000110001

[BCX]

Plugged in my Tactrix today to download yhe tune and to look at fuelling. The tune is one that I've done myself and uploaded about 8 weeks ago.

Same cable same software, is nothing has changed.

Downloaded the tune, did my changes and now its not allowing me to upload? Test write webt fine but not the real one.

Log says:
Kernel flash enable
Kernel blank flash page: addr: 00011000
Kernel error: programming failure
Warning: failed to erase pages at 000110001

Usual culprit is incorrect memmodel in the XML vs processor revision. Flash memory between the different revisions is broken up into different segments/pages.

7202 = h8539f
7203 = h8539fa

if you still have it, paste the whole log output rather than just the error?

[GregorEST]

I have the same problem, uploading log, has anyone had the same problem?

EDIT: Nvm fixed it lol, just tried flashing an original image I had gotten from the ecu a few months ago