PDA

View Full Version : Evo 7 intercooler



Stash469
02-04-2021, 04:09 PM
Just upgraded the intercooler on my Evo 7RS, so was thinking about put the stock one on the vr4 as a sort of oem upgrade almost. Just wanted to check if it will fit with out too much modification, and if anyone knew what elbows etc I would need. I believe the official dimensions of the evo cooler are 470x310x70mm. TIA

Davezj
03-04-2021, 01:35 PM
i think the after market intercoolers most people fit are 600mm x 300mmx 76mm
this is the core size the end tanks make it about 760mm total width i think
it is the height that is the most difficult dimension to accommodate 300mm
so it might be tight and hang down a bit lower than normal
plus there is always the issue of fitting it behind the front crash bar you have to do some modifying of the the vertical bonnet latch mounting point.

but you can get all this install info from the other intercooler upgrade threads there are on this forum.