kc427
24-05-2023, 09:28 AM
I know it is outdated, but maybe just FYI, I used an Arduino to convert the PLX wideband AFR to AEM protocol, so that on the EvoScan can log as AEM AFR data. To do that, assuming you have experience on Arduino, and if now, it's better to google or youtube for tutorial because it is actually very simple.
Hardware:
normal 3.5mm headphone jack plug
Arduino supported board, eg, I use ESP32 dev board which is cheaper and faster.
Software:
Arduino IDE.
EvoScan, I am using latest v3.1
This 3.5mm plug is used to plug into the PLX control box. The "tip" is the data, and the "bottom" on the plug is ground. So, simply connect the data into the RX of my ESP32, and the GND of course.
https://www.clubvr4.com/forum/attachment.php?attachmentid=83753&stc=1
After that, connect my ESP32 to the PC USB and then select the correct COM port from the EvoScan by "WideBand(WDB) -> Select Wideband Serial ComPort" and also select the "AEM UEGO 115200......." as the AEM device.
https://www.clubvr4.com/forum/attachment.php?attachmentid=83750&stc=1
After all this, then can happy logging!After all this, then can happy logging!
https://www.clubvr4.com/forum/attachment.php?attachmentid=83752&stc=1https://www.clubvr4.com/forum/attachment.php?attachmentid=83751&stc=1
Thanks.
Hardware:
normal 3.5mm headphone jack plug
Arduino supported board, eg, I use ESP32 dev board which is cheaper and faster.
Software:
Arduino IDE.
EvoScan, I am using latest v3.1
This 3.5mm plug is used to plug into the PLX control box. The "tip" is the data, and the "bottom" on the plug is ground. So, simply connect the data into the RX of my ESP32, and the GND of course.
https://www.clubvr4.com/forum/attachment.php?attachmentid=83753&stc=1
After that, connect my ESP32 to the PC USB and then select the correct COM port from the EvoScan by "WideBand(WDB) -> Select Wideband Serial ComPort" and also select the "AEM UEGO 115200......." as the AEM device.
https://www.clubvr4.com/forum/attachment.php?attachmentid=83750&stc=1
After all this, then can happy logging!After all this, then can happy logging!
https://www.clubvr4.com/forum/attachment.php?attachmentid=83752&stc=1https://www.clubvr4.com/forum/attachment.php?attachmentid=83751&stc=1
Thanks.