Does the above mitsi part numbers for curved front arms , not the straight lateral ones fit the vr4 please?
I've tried /googleit but nothing confirming
If someone knows that would be great thanks.........
Printable View
Does the above mitsi part numbers for curved front arms , not the straight lateral ones fit the vr4 please?
I've tried /googleit but nothing confirming
If someone knows that would be great thanks.........
What you asking? :)
If they are right?
Found this after searching on cvr4 :)
Lateral arm LH: MB912509, RH: MB912510
Compression (curved arm) LH: MB912511 , RH: MB912512
http://www.clubvr4.com/forum/showthr...light=MB912512
Thanks Barry, I did look but never came across that thread (or I just missed it)
I need to know if those curved arm numbers are for or will fit the vr4?
I think the v6 ones are the same but not to sure? If it comes to it I'll phone mitsi
from Camskill site:
PRODUCT MODEL
(EC5A EC5W Legnum/Galant VR4)
PRODUCT OPTIONS
LH Curved Front Arm,
RH Curved Front Arm
Description
Front curved arm. See pic for location.
Quantity
ONE
Notes 1
These are now supplied as OE arms.
We do not supply aftermarket ones as we've had too much trouble with failures.
Manufacturers Part Numbers for REF ONLY
LH= MR296293
RH= MR296292
http://www.camskill.co.uk/m22b0s1403...num_Galant_VR4
ASA says louis is correct for a my car anyway (98 VR4), and the same for a 2001 FL i have the chassis number for.
steve give me the chassis number of the n/a V6 and i can get you the correct curved arm number for you.
They are the same in v6 n/a Galants.
IIRC, also been used in some Hyundai vehicle, but can't tell which one. Other day I've purchased Hyundai arms for less than 50% Mitsi price with the same quality built (Glenn and psbarham had seen them). And factory numbers started with MBxxxxxx.
That sounds like a good option so MB numbers above are correct for the VR4.
It just so happens that I am in need of a curved arm or two.
So this part number for the curved arm is a confirmed fit? Same as MR296292, and I guess Mr296290?
I'm trying to figure out if this TRW part would fit.
https://aeromotors.ee/kataloog/artic...286/jtc726-trw
use this website to check part numbers against your specific VIN number.
https://mitsubishi.epc-data.com/