-
Outer CV joints
OK. We've made some good headway on inner cv joints on the front.
Let's talk outer joints.
I did a quick search on here and didn't come up with much, and browsing Amayama confused the hell out of me.
So what do we know about the front outer joints?
As you can probably tell I'm going to be working through all the driveshaft joints so that people like myself who are ready, willing and most importantly able/competent in changing joints themselves have the info readily to hand to be able to match up a compatible joint.
I'm about to dash to work for the evening, but I have a joint here from a PFL Vr4 from which I'll take a number of measurements from, probably tomorrow, but I may make a start after I finish depending on what energy I have
Sent from my SM-G981B using Tapatalk
-
well i have ordered the the other joint that @Confused said was a outer CV joint the febest 0410-033A43
it is a 25x54x24 with a 43 teeth abs wheel joint
25 splines on the outside stub axle
54mm the diameter flange in front of the abs wheel
24 spline on the inside of the CV joint.
43 number of teeth on the abs wheel.
i am hoping this one is correct.
i have the joint in front of me.
-
i should be able to confirm tomorrow or thursday when i try and fit it.
i will then be able to confirm the inner and outer joints on the rear drive shafts as well as i have a some spares of these so this should make the job much easier.
-
I'll check the shaft and joint I have as well.
If our numbers match then that will surely lock it in to be at least 99.9% chance its right
God I love this community for problem solving ha ha
Edit: spelling mistake corrected
Sent from my SM-G981B using Tapatalk
-
-
