Printable View
Not sure exactly what I'm meant to be looking for in the Evoscan log :P I did a run down the road yesterday, mainly normal driving with a few 3rd gear foot to the floor spurts.
Can someone check out the log and see if there is anything not quite right? Thought it looked OK when I checked it, but want to be sure.
Thanks!
Knock sum is missing
Hmm don't know what happened there, here's another copy of the file.
Looks relatively healthy. Your car wasn't preoperly warm at the start of the log - the water temp is still rising and your o2 sensor hasn't warmed up. Knock is almost non-existant, looks healthy from that point of view. Air flow, timing, tps etc all seem to be showing values that look normal.
Yeah the car had been running for a minute or two when I started Evoscan, I never thrash it till the water temp is normal on the gauge and oil is at least 70 degrees. Oil usually gets to 90 - 95 if I give it a hard run.
Thanks Nick - if it's looking healthy then there might not be a reason to remove the pod currently on the MAF...
But you hve no view on AFR's so it could be running as lean as a lean thing , or as rich as a rich thing and evoscan would not tell you
What John said.
Without AFR's it's impossible to say how the pod filter is running.
I am also wondering if someone can help me read and understand my logs. I have a 97 Legnum in the US. I recently had the timing belt, water pump and seals replaced. Here is a scan I did today. No WOT on this log. I will post another one tonight with WOT. Thanks in advance for all your help. https://drive.google.com/file/d/1V64...ew?usp=sharing
Here is the log with WOT.
https://drive.google.com/file/d/1z37...ew?usp=sharing