Pretty much says it all in the title. Now found /Banana
Printable View
Pretty much says it all in the title. Now found /Banana
Steve , if this is for a brembo convertion then you will just need the hub carriers with ABS sensors , everything else is the same
Have a look around for a v6 hub carrier from a 2001 model onwards as they are the same but have a 4 stud bearing in
Cheers John
also forgot to say you only need the fronts
steve, i have a ABS sensor for the hub carriers if you need it. i only have one side though, it's brand new unused drivers side UK front ABS sensor part number MR370908, (Not the passenger side MR370907). it's the longer style sensor so will fit facelift hubs. £90 and it yours
Thanx Lee
Lee
Thanks for the offer. I'll bear it in mind but at this stage I'm holding out for the whole bundle
John
Thanks for all the advice
:bump2::bump2::bump2:
FL front hub carriers with ABS sensors
Well you can't have mine !
Well I wouldn't want yours anyway/Hmmm/Hmmm/Hmmm
Found some late last night/Banana/Banana/Banana
Well done Steve. What pads do you intend to use ?
Intend to stay with the pads still in the Brembos - there is at least 60% left on them.
Then I can make a direct comparison with the Mintex grooved disc/Carbotech XP8 dust/squell makers I have on now.
After a while I'll post for alternatives if I find them wanting (hopefully not at the same time as a new front end!)
Well for what it's worth Steve I've had standard Brembo pads and they are crap. I've also had Carbotechs, they were fantastic but I couldn't stop them squealing. Currently got Mintex 1166 which are very good and silent too so the best compromise for me.
If I make it to the ring in October i will be using Carbotechs though as their bite is just fantastic.
Hello do you still have the abs sensor? Thank you
Thread from the dead!!!
This thread is over 10 years old, I doubt very much if the part is still available. The poster also hasn't been online since April 2019.
:happy:
Hello Lee, do you still have the abs sensor?
Thank you!