I've just ordered one, will give it a try with EvoScan (see if it detects it) then modify it accordingly - might even then sell pre-modified ones via https://www.adaptiveengineering.co.uk in case anyone can't solder :)
Printable View
I've just ordered one, will give it a try with EvoScan (see if it detects it) then modify it accordingly - might even then sell pre-modified ones via https://www.adaptiveengineering.co.uk in case anyone can't solder :)
Good shout that! If I hadn't already bought the soldering iron and plug, I'd buy one.....I may still do after I mess mine up lol
Well, I'll get some modified and up for sale - if not for you, for the next person!
Unfortunately the one I got delivered from that last eBay listing has a CH340 chip, which isn't an FTDI chip, so won't work with EvoScan.
I've ordered another, from another seller, which states it's got a FTDI chipset, so hopefully that'll arrive in a few days.
Hi guys I've sorted the cable out and the car is going into flashy mode when plugged in, but evoscan doesn't seem to but connectting to the ECU. Any ideas?
Attachment 83422
I did a reboot and it is working now.
Awesome! Nice work!
The second cable I ordered, which specifically said FTDI in the title, was also a CH340G chipset! :( My hunt continues!
Looks like these guys might be on it for the Forester
https://www.djwwautodiagnostics.co.u..._21584490.aspx
Iv'e been deliberating to grab myself an openport 1.3 (Flash capable not just logging) but $157 for a cable of limited use is off-putting. The thing is unlike a lot of other Galant's mine does actually work with Torque and OBD apps. The only thing that I can see being the reason is that mine is GDI. Given I own an openport 2.0 can I just get this bit and end up with the same thing? https://evoscan.com/product/mitsubis...tor-1998-2006/
Yes, an OpenPort 2.0 is absolutely fine - it's what I have, along with the linked reflash adapter.
We often need to ignore some of the crap that's thrown around regarding EvoScan and OpenPort from the Evo lot... :D
Though, whether anyone has a definition file for the GDI ECU is another thing...