sorry can’t get my head around it can’t see we’re it say mannage attachments
Printable View
sorry can’t get my head around it can’t see we’re it say mannage attachments
test :)
link to youtube vid of how to upload a n image to cvr4 :)
hopefully this link will work lol:
https://youtu.be/NNDIROMw06Q
Sorry I’m using my phone 😂😂 prob y
Think I have it lol
Hmmmm lol
:)
What’s the difference in facelift front hubs compared to preface lift hubs that the Brembo calipers don’t fit on
Spacing of the caliper mounting bolts.
The facelift are wider apart.
Everything else is pretty much the same.
The abs sensor mounting depth might be different.
You can get some brackets to make the bolt spacing change, but they are expensive and probably cost more than a replacement pair of second hand front hub carriers.
Thanks for the info
I had been thinking legnum, estate, not saloon, lol!
I am afraid to say i'm not sure of saloon differences, hopefully someone else can assist.
There are quite a few threads on brake upgrades, re pads and discs for the prefacelift.
The actual hub carriers are not too hard to find, as all the galant and galant estates sold in the uk from 98 have the facelift carrier.
But they are 4 bolt hubs, but you can unbolt the 4 bolt hubs and replace with the 5 stud vr4 or legnum or evo 4,5,6 hub and bearing. the hub and bearing are available on ebay or viamoto everywhere.
hop this helps
:)
I’ll just measure the space on the back of the hub think pfl is 135ml and fl is 160ml if I’m right car is late 99 so should be fl model tnx
That makes thing a lot easier!.
Brembo callipers from EVO will bolt straight on with brembo discs.
there are many guides on parts and fitting
Thanks I’ll let u know how I get on
160ml 👌