VR4 Successfully Flashed

[Patryn999]

I gotta scram tonight so I'll give you what I've done in the mean time, it inherites from vr4base1, which is on here somewhere if you don't have it. Otherwise the maps that look right are:
Fuel high/low
Open loop load
Boost cut x 2 (1 for auto, 1 for manual according to Russians)
Boost desired engine load
WGDC
Ignition maps High/Low
Cat ignition maps.

Although all that it inherits seems to have wrong RPM/LOAD addresses, but right table index, Rev and speed limit seem to be same from vr4base1 xml definitions. Data from tables I listed above matches my EM2005 ECU, so seems legit.

P.S - remove the .pdf extension when you go to use it. Had to add it to upload.