Fs: Sard R2d2 *** SOLD! ***

[miller]

SARD R2D2.

Used but in good condition. Normally retail at £150 upwards.

Fully adjustable so loads of phssssssssst or just a slight hint of phsst whichever takes your fancy.

Comes complete with blanking plug. Fit in 5mins flat!

Surplus to my requirements.

£80 delivered anywhere in the UK


Cheers


Mike

[SGHOM]

No ta mike....


But I'll have a C3P0 if you have one?

[Humpty's Revenge]

No ta mike....


But I'll have a C3P0 if you have one?

Oh dear Oh dear Oh dear

[Spirit]

Got one of these on my Evo and can vouch for the quality......bargain price too from Mike so get it snapped up peeps

[crazyken76]

good price miller i wont say how much i paid for mine but these are realy good

[miller]

Usual! Can bring with me to Japfest if you fancy it!

[Beastlee]

I'll have it.

[Humpty's Revenge]

I`ve just tried fitting an R2D2 but I don`t get loads of phssssssssst or just a slight hint of phsst just beeping and whistles plus this wont fit in my engine bay!

Plus when I went to put the blanking plug in, well the language!!

[Beastlee]

Pmsl

[miller]

Lee,

PM responded and its winging its way to you!

[Beastlee]

Whoop whoop, I've been missing the noise from my old alloy unit. Refitted a stock one and the car drives much soother but doesn't hold boost as well.
Will be interested to see how the car performs with this fitted.
Thanks Mike.

[Beastlee]

Arrived today safe and sound. Thanks Mike.

Quick question, did you just leave it flapping around or did you fix it in place? Oh and I assume it's safer to fix it so it's not pointing forwards?

[miller]

I didnt fix it in place, the pipe holding it seemed strong enough not to warrant the extra hassle. Though there is a angle bracket off it thats for static fixing it if you need it.

[Beastlee]

Just spotted that extra bracket, I reckon I can fashion something if need be. Was just reading some other threads and realised that there's supposed to be a locking nut on that adjuster thread :/ Clearly it's not an issue but I'm going to dig one out to be safe.

[crazyken76]

Just spotted that extra bracket, I reckon I can fashion something if need be. Was just reading some other threads and realised that there's supposed to be a locking nut on that adjuster thread :/ Clearly it's not an issue but I'm going to dig one out to be safe.

you wont need anything on it i put mine on and the clamps hold it nice hasent moved at all

[Beastlee]

Sweet. Thanks Ken

[Beastlee]

Now fitted and it sounds lovely. Might weaken it slightly as I have to give it loads to make it sound. Idle is a little low for now but no stalling. My god does it make the car stink of fuel!

[Beastlee]

Forgot to mention, is it something about my car or is it normal that I get a healthy whoosh followed by a longer almost whistling sound from the bov?

[Mark 4]

Mine does that Lee.

[miller]

Lee i had it set quite tight so it only went off on hard going. Normal driving was inconspicous. alankey turn anticlockwise i think for it to open up easier.