I'm sure Julian is taking about the narrowband AFR, Barry.
I'm sure Julian is taking about the narrowband AFR, Barry.
Cheers nick.
So I'm thinking
Oil pressure
Oil temp
Not sure about last, maybe water? Or boost..
1st 1998 PFL LEGNUM VR4
2nd 1999 RALLIART FL LEGNUM VR4 EVO 8 BREMBO'S AND EVO 9 ENKEI ALLOYS 26/02/11
PLX WIDEBAND AFR CONTROLLER & GAUGE 05/03/11
CARBON WRAPPED CENTRE CONSOLE 05/0311
FORGE SPLIT-R DUMP VALVE 05/03/11
SWOOSH BOOST/VAC GAUGE 05/03/11
JDM HEADLIGHTS MODIFIED TO LHD 05/03/11
FUJITSUBO JAZMA SS EXHAUST FITTED 07/03/11
D2 RACING COILOVERS FITTED 12/03/11
EBC REDSTUFF PADS FRONT AND REAR 19/03/11
MOCOL 10 ROW OIL COOLER FOR THE G/BOX 26/03/11
OIL CATCH CAN 10/04/11
2.5" -3" HOME MADE DOWNPIPES AND DE-CAT 28/04/11
AYC LIGHT BARS ADDED TO CLOCK 14/05/11
SWAPPED 45,000MILE ENGINE FROM LEGNUM 1 TO LEGNUM 2 13/06/2011
MAGNECOR 8MM LEADS AND DENZO IRIDIUM PLUGS GAPPED TO 0.8MM 13/06/2011
255LPH FUEL PUMP (HOT-WIRED) SARD FPR 27/01/2012
SO FAR....
@swinks where did you get your gauge holders from? - i liked the look of them as they sit nice and cleanly on the pillar.
SUPPORT CLUBVR-4 TODAY!
Please do not PM Moderators and Committee Directly, for quicker response times please follow this guide
HOW TO: Contact Committee or Moderators
My Articles: Fog Light in Rear Cluster - Changing AYC Switch - Changing Drive Shaft - Changing Front suspension
My Projects: Installing Uprated Clutch - making Gauge Pods (Tri-pod)
Club Related: HOW TO Guides - HOW TO: Contact Committee or Moderators
RIP: Type-S - 1998 R - Trigger Mauve - Mauve History | First VR4 - Second VR4 - Third VR4
Get your own fuel sig in the Garage (Members Only) - Visit my Garage ........What Is Geocaching?
They are Vumaxx holders. Very handy indeed, you'll get different mounts to dash/pillar to your choice. With pillar I used only ball-head base mounted with bolt.
Here is the website:
http://www.vumaxx.com/
and eBay auctions:
http://www.ebay.co.uk/sch/i.html?_nk..._osacat=131090
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
You will get sensors with gauges. Most kits has one. It's very unlikely to get gauge without sensors, but better check description twice.
All you need is bunch of wires to get them thru firewall. One for oil temp signal, other for oil pressure signal.
And, please Barry, use a top range sandwich plate, i.e. Mocal, SARD, etc.! They will cost in range of 40 - 60 GBP.
I've just been looking at the gauge holders on http://www.autodials.co.uk, specifically the image of the package and the bits included - Looking at your gauges, i don't see the sun cover thingy or the rubber flexy boot in the image of the packaging, do you know where can i find them?
You not need a sun covers in Manchester
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
Rubber boot is included in a package, it must be inside a cup holder.
Sun visors I've bought them separately:
http://www.ebay.co.uk/sch/i.html?_sa...0visor&_sop=15
K, just to post what i've found and save me searching for ages later on when i come to buy the stuff..
Pod.
Vumaxx Gauge Holder 52mm
AFR.
Innovate MTX-L Wideband Gauge
Oil Pressure/Temp
Innovate MTX-D: Digital, Oil Temperature & Pressure Gauge
Get a sandwich plate like these Barry:
http://www.rhdjapan.com/trust-greddy...ard-type-21794
http://www.fortyone.co.nz/parts/view/38373.html
http://www.bloxracing.com/bloxshop/i...product_id=437
I think M20 is what we need for our filters.
M20 is correct size
Buy yourself a universal 3 pod pillar that is bout half the size of our std pillars, respray the std pillar black and then screw the universal pod onto it job done like mine
5555.jpg
1998 Legnum VR4 Twin Turbo
17" Evo VII alloys in black
Comma 5.1 brake fluid
Full exhaust system with decat
Magnecor performance ignition leads
NGK BKR7EIX plugs
Blitz Boost controller Low: 0.5 bar High: 0.9 bar
Turbo timer
3 pillar pod with Boost, Oil temp & Psi gauges
I'm not so keen on how its attached to the pillar tbh, i'm following in Tomasz's footsteps and getting some Vumaxx ones, infact... one arrived today! - just need to get the AFR Gauge now.
photo.jpg