Big brake kit with Brembo Calipers

[Dan@DB-Power]

Hi Guys

Seeing as my VR-4 has come to an end I'm selling my old brakes that were on it:-

They are 315mm Grooved Brembo discs (BMW M3 E36)
Peugeot 406 Couper 3.0 V6 Brembo calipers with OEM pads
Brackets etc

They will fit under most 17" wheels, and are a massive upgrade over the original ones.

I ran standard hoses but had to cut the banjo bolt down about 2mm.

They are an easy fit, just remove the dust shield, put discs on, bolts up calipers/brackets.

They have only done about 400 miles of use, but never had a problem with them

IMAG0312.jpgIMAG0313.jpg

Due to the disc radius being larger than the original 406 discs, you do get a slight bit of pad overhang (about 1mm) not a problem it just breaks off as it wears

Looking for £450

[Dan@DB-Power]

bump

[Dan@DB-Power]

bump, any offers? I really don't want to egay them