Results 1 to 13 of 13

Thread: ecuflash .bin file (need xml)

  1. #1
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     

    ecuflash .bin file (need xml)

    would any of you clever chaps like to take a look at this FTO ecu rom and see if you can come up with an xml for it please.
    Attached Files Attached Files
    Richard Batty
    2.5ltr V6 Turbo FTO

  2. #2
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    I think Ive found the fuel and ignition maps.. but the axis are wrong

    ftomap3.JPGftomap4.JPG
    ftomap1.JPGftomap2.JPG

    <table name="Fuel Map 1 - HI OCTANE " category="Fuel and Ignition Maps" address="1182B" type="3D" swapxy="true" scaling="AFR">
    <table name="Load" address="2eb42" type="X Axis" elements="8" scaling="Load"/>
    <table name="RPM" address="2ec62" type="Y Axis" elements="17" scaling="RPM"/>
    </table>

    <table name="Fuel Map 2 - LO OCTANE " category="Fuel and Ignition Maps" address="118BB" type="3D" swapxy="true" scaling="AFR">
    <table name="Load" address="2eb42" type="X Axis" elements="8" scaling="Load"/>
    <table name="RPM" address="2ec62" type="Y Axis" elements="17" scaling="RPM"/>
    </table>

    <table name="Ignition Map 1 - HI OCTANE " category="Timing" address="11c07" type="3D" swapxy="true" scaling="Timing">
    <table name="Load" address="2eb42" type="X Axis" elements="9" scaling="Load"/>
    <table name="RPM" address="2cf9a" type="Y Axis" elements="21" scaling="RPM"/>
    </table>



    <table name="Ignition Map 2 - LO OCTANE " category="Timing" address="11ccb" type="3D" swapxy="true" scaling="Timing">
    <table name="Load" address="2eb42" type="X Axis" elements="9" scaling="Load"/>
    <table name="RPM" address="2cf9a" type="Y Axis" elements="21" scaling="RPM"/>
    </table>
    Last edited by zentac; 19-05-2011 at 12:33 PM.

  3. #3
    Kenneth's Avatar

    Offline
     
    Name
    Kenneth
    Join Date
    Nov 2004
    Last Online
    12-01-2024
    Membership ID
    NZ002
    Posts
    6,968
    Country
    New Zealand
    Location
    Cambridge
    Car
    Kia Sorento :P
    My Garage
    Visit
     
    fuel:
    RPM: 2c430
    Load: 2c458

    Ignition:
    RPM: 2c490
    Load: 2c4ce

    All care and no responsibility.... I didn't verify in EcuFlash but it looks right in disassembly.

  4. #4
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    fuel:
    RPM: 2c430
    Load: 2c458

    Ignition:
    RPM: 2c490
    Load: 2c4ce

    They look spot on - thanks.

    Any joy with the revlimit?

  5. #5
    Kenneth's Avatar

    Offline
     
    Name
    Kenneth
    Join Date
    Nov 2004
    Last Online
    12-01-2024
    Membership ID
    NZ002
    Posts
    6,968
    Country
    New Zealand
    Location
    Cambridge
    Car
    Kia Sorento :P
    My Garage
    Visit
     
    Try 10882 for rev limit. A bit different to the VR-4 code, so not 100% on that one.

  6. #6
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    thats what we had for the rev limit, I think there must be 2, as thats 6209rpm which I think is what the limit is set to before the car warms up. There should be one around 8050rpm.

  7. #7
    Kenneth's Avatar

    Offline
     
    Name
    Kenneth
    Join Date
    Nov 2004
    Last Online
    12-01-2024
    Membership ID
    NZ002
    Posts
    6,968
    Country
    New Zealand
    Location
    Cambridge
    Car
    Kia Sorento :P
    My Garage
    Visit
     
    I would hazard a guess at 8117 being the RPM limit you are after

    <table name="Rev LimitA" category="Limits" address="10882" type="1D" level="4" scaling="RPMLimit_16bit"/>
    <table name="Rev LimitB" category="Limits" address="113fa" type="1D" level="4" scaling="RPMLimit_16bit"/>

  8. #8
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    looks good, thanks, any luck with the injector sizes? and there should be a mivec point in there somewhere, then I think weve got everything we need.

  9. #9

    Offline
     
    Name
    David
    Join Date
    Apr 2005
    Last Online
    06-02-2024
    Posts
    125
    Country
    Australia
    Location
    Perth, Australi
    Car
    Mitsubishi Magn
     
    How were you able to read the rom? I have tried on some FTO's and wasn't able to. If you could let me know how you did it please as I have a lot of WA Customers who would love this as an option for tuning.
    Racing Performance Works - Mitsubish Performance Specialists. Check the following link for the latest information on the Galant/Legnum R&D project http://www.rpw.com.au/shop/index.php...=221&Itemid=40

  10. #10
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    plugged in the openport 2.0 then wired the white re-flash connector in to pin 79 on the ECU and it allowed me to read it.

  11. #11

    Offline
     
    Name
    David
    Join Date
    Apr 2005
    Last Online
    06-02-2024
    Posts
    125
    Country
    Australia
    Location
    Perth, Australi
    Car
    Mitsubishi Magn
     
    Okay thanks so to confirm, in my understanding (Lol) you hooked up the OP2.0 but you wired back to the ECU pin 79 for teh K line voltage input into the back of the OP2.0 plug. Have you confirmed you can write back to it yet?

  12. #12
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    thats correct we haven't confirmed we can write back yet, but its the 7202 chip in same as the VR4 so it should be writeable. I will try it sometime this week.

  13. #13
    zentac's Avatar

    Offline
     
    Name
    Richard
    Join Date
    Apr 2003
    Last Online
    02-03-2022
    Posts
    2,602
    Country
    England
    Location
    Rotherham
    Car
    600+ bhp FTO-VR
     
    I remapped an FTO yesterday and disconnected the battery for an hour and it retained its new settings so it works

Similar Threads

  1. ECUflash for v6 N/A
    By lateshow in forum Performance Mods
    Replies: 74
    Last Post: 17-08-2016, 09:31 PM
  2. Where is the User Bull**** Bin?
    By Ryan in forum Site General / Ideas
    Replies: 2
    Last Post: 02-01-2011, 08:27 AM
  3. User for the bullsh!t bin...
    By Ryan in forum Site Bugs / Issues
    Replies: 382
    Last Post: 07-08-2010, 09:04 AM
  4. ECU 7202F cannot be read by ECUflash?
    By MarkSanne in forum ECUs / Mapping
    Replies: 15
    Last Post: 23-02-2010, 03:55 PM
  5. Bin job??
    By Paul Beazer in forum General Chat
    Replies: 12
    Last Post: 09-01-2006, 12:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •