http://www.facebook.com/photo.php?fb...type=3&theater
they need sorting which means painting but i cant put my car off the road for that length of time so i am after a set that i can clean up and paint at my leisure
http://www.facebook.com/photo.php?fb...type=3&theater
they need sorting which means painting but i cant put my car off the road for that length of time so i am after a set that i can clean up and paint at my leisure
1998 2.0 GLS>1999 2.4 GDI>2001 2.5 sport>1997 VR4 + 2000 2.5 sport
1997 legnum (manual)
CUSCO rear strut brace
BILSTEIN springs on uprated shocks
3" S/S downpipes and exhaust
induction kit
EVO V RS transfer box
EVO VIII brembos
HEL brake lines
V6 sport interior
laser cut engine cover
GRP EVO style bonnet
18" inovite redlines
HKS SSQV
2003 Mazda 6 2.0 TS estate
2001 fl v6 with the larger brake discs. 275mm fitted last night with mintex pads
get facelift vr4 calipers (will bolt on) and rotors,
there should be a few sets floating around from those that have done the brembo thing.
and redrill the rotors to 4 stud,
what size are the discs on the car they came from Dave?
what are rotors Carsten?
Are standard vr4 discs
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
my discs and pads have done less than 100 miles and the back ones are only a few months old! im only after a set of calipers that i can paint and straight swap for the ones i currently have. i wont buy VR4 calipers unless someone can confirm from experience that they will fit. even the V6 discs need measuring before ordering due to 2 difference sizes and my mate has just been bitten by that one. needed brakes, guessed the size, got it wrong!
mate got full set of calipers + brand new rear rotor + mint cond front ones + brake pads (which done 1k)
yes vr4 brake upgrade has been done before on v6's,
like i said, all you have to do is redrill the disks to 4 stud (i assume your v6 is 4 stud)
i have vr4 brakes and disks on my v6, but i converted to 5 stud hubs aswell
twin pot fronts with 296mm disks, cant remember the specs of the vr4 rears, iknow there single pots and bigger disks
Yup they will fit - as Carsten said he has vr4 brakes on his v6 and I fitted vr4 brakes to one of Bradc's cars
To contact the CVR4 Staff please see HOW TO: Contact Committee or Moderators
IIRC the VR-4 brake discs are 294mm (front) and 276mm (rear).
its an hours job bud, I was the first to t Ty it and the car is still using the same set up 3 or 4 years later.
just get a set of face lift front calipers ans discs and redrill to suit your hubs, it really is a peice of piss to do.