full set of calipers

[Scanny]

http://www.facebook.com/photo.php?fb...type=3&theater

they need sorting which means painting but i cant put my car off the road for that length of time so i am after a set that i can clean up and paint at my leisure

[psbarham]

pfl v6?
I have some here somewhere.

[Scanny]

2001 fl v6 with the larger brake discs. 275mm fitted last night with mintex pads

[Wobble]

Have no idea of any good for you , but have a vr4 set I need rid of .r

[Gly]

get facelift vr4 calipers (will bolt on) and rotors,

there should be a few sets floating around from those that have done the brembo thing.
and redrill the rotors to 4 stud,

[Scanny]

what size are the discs on the car they came from Dave?

what are rotors Carsten?

[Wobble]

Are standard vr4 discs

[adaxo]

get facelift vr4 calipers (will bolt on) and rotors,

there should be a few sets floating around from those that have done the brembo thing.
and redrill the rotors to 4 stud,

look here at no 3

[Scanny]

my discs and pads have done less than 100 miles and the back ones are only a few months old! im only after a set of calipers that i can paint and straight swap for the ones i currently have. i wont buy VR4 calipers unless someone can confirm from experience that they will fit. even the V6 discs need measuring before ordering due to 2 difference sizes and my mate has just been bitten by that one. needed brakes, guessed the size, got it wrong!

[viniu88]

mate got full set of calipers + brand new rear rotor + mint cond front ones + brake pads (which done 1k)

[Gly]

yes vr4 brake upgrade has been done before on v6's,

like i said, all you have to do is redrill the disks to 4 stud (i assume your v6 is 4 stud)

i have vr4 brakes and disks on my v6, but i converted to 5 stud hubs aswell
twin pot fronts with 296mm disks, cant remember the specs of the vr4 rears, iknow there single pots and bigger disks

[Subaru ETA]

Yup they will fit - as Carsten said he has vr4 brakes on his v6 and I fitted vr4 brakes to one of Bradc's cars

[Ryan]

IIRC the VR-4 brake discs are 294mm (front) and 276mm (rear).

[psbarham]

its an hours job bud, I was the first to t Ty it and the car is still using the same set up 3 or 4 years later.
just get a set of face lift front calipers ans discs and redrill to suit your hubs, it really is a peice of piss to do.