hi I found I think good price for billet crankshafts it is 1500 usa dolars order is 12 or more of them
http://mesg.ebay.co.uk/mesgweb/ViewM...ll/78084435313
hi I found I think good price for billet crankshafts it is 1500 usa dolars order is 12 or more of them
http://mesg.ebay.co.uk/mesgweb/ViewM...ll/78084435313
The link tries taking me to my messages, rather than an item link?
October 2023 fleet status: 100% operational
| Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |
Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.
I also can't see anything - the link takes me to my messages and then gives me an error message.
Going by previous discussions the price is good, but I am not sure if there are many people in the world looking for cranks.
My mistake with the link.it is good to try it if somebody wonts to the price it is not bad at al . £ 1024
link still does not work.
Failed link.jpg
Bye for Now!
This link leading to messege which says about the offer which is 12 Or more for price of 1500 usa dolars
Today I received offer for the same money but for 5 crankshafts minimum which Is better from previous one
Who would like spent such money for part which matters only in project 600+ bhp?
Stock crank is perfectly OK till that level, unless you are making stroker then custom crank is important.
Before you will reach 600+ bhp you will spend well over 15+k pounds, can't see any volunteers here. Even crazy Russians here stayed with stock crankshaft.
I'd like to see you first reach over 500+ bhp with good write-up, then maybe you will find some followers here, but now... dream on... sorry
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
That is OK I just checking is itvthere some interest that iscit I will not go further for now I will finish my project 2x td04 it is left to do injectors an remap by Eurospec where I am waiting my clutch to be done
the link still does not work.
same message as i posted above
This is taking everyone to YOUR messages. Hence why only you can see the page correctly. If you were to post up your ebay login details then we could all see page
On a serious note though you could just copy and paste the text of the message into a comment on this thread
Link working or not, we, well 99.9% of us, still far off 599 BHP barier when possibly we have to look in billet cranks options.
I would rather see 'bolt on' TD04 kits first.
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
copy and link messag this is for 10-12 as a group
HI the best price we can do is 1500 USD for each. It takes around 60-80 days for production.
Please tell me the price in your mind
Thanks
I am not very good with computers
I can almost gaurentee those cranks will rubbish quality for that price.
A good billet crank costs easily twice that, often 3 times.
To my knowledge no-one has actually broken a 6A13 crank definitivaly from pure power output, Zentac cracked a few, but again hes the only person to have ever approached that sort of power level. and a million other factors could caused his cracking.
Hell I've seen a evo street car with only 700hp crack a Billet crank where as some people push more power than that on stock cranks.
what is the name of the company who you are in contact with just out of intrest.
the company is LJRacing based in China I just found out.