I've just ordered one, will give it a try with EvoScan (see if it detects it) then modify it accordingly - might even then sell pre-modified ones via https://www.adaptiveengineering.co.uk in case anyone can't solder
I've just ordered one, will give it a try with EvoScan (see if it detects it) then modify it accordingly - might even then sell pre-modified ones via https://www.adaptiveengineering.co.uk in case anyone can't solder
Good shout that! If I hadn't already bought the soldering iron and plug, I'd buy one.....I may still do after I mess mine up lol
Well, I'll get some modified and up for sale - if not for you, for the next person!
Unfortunately the one I got delivered from that last eBay listing has a CH340 chip, which isn't an FTDI chip, so won't work with EvoScan.
I've ordered another, from another seller, which states it's got a FTDI chipset, so hopefully that'll arrive in a few days.
Last edited by Confused; 06-04-2022 at 11:12 AM.
Hi guys I've sorted the cable out and the car is going into flashy mode when plugged in, but evoscan doesn't seem to but connectting to the ECU. Any ideas?
Capture.JPG
I did a reboot and it is working now.
Awesome! Nice work!
The second cable I ordered, which specifically said FTDI in the title, was also a CH340G chipset! My hunt continues!
Looks like these guys might be on it for the Forester
https://www.djwwautodiagnostics.co.u..._21584490.aspx
Iv'e been deliberating to grab myself an openport 1.3 (Flash capable not just logging) but $157 for a cable of limited use is off-putting. The thing is unlike a lot of other Galant's mine does actually work with Torque and OBD apps. The only thing that I can see being the reason is that mine is GDI. Given I own an openport 2.0 can I just get this bit and end up with the same thing? https://evoscan.com/product/mitsubis...tor-1998-2006/
PunkyB
2003 Mitsubishi Galant Estate Equippe 2.4 GDI INVECS-II finished in Trigger Mauve Pearl
Yes, an OpenPort 2.0 is absolutely fine - it's what I have, along with the linked reflash adapter.
We often need to ignore some of the crap that's thrown around regarding EvoScan and OpenPort from the Evo lot...
Though, whether anyone has a definition file for the GDI ECU is another thing...