I bought some boot struts off flea bay and they are miles bigger that the ones that are on , did they do 2 differnent types ?
ian
I bought some boot struts off flea bay and they are miles bigger that the ones that are on , did they do 2 differnent types ?
ian
Yes. Prefacelift are longer than facelift. Facelift were never officially supplied inEurope, so spares might be a little more interesting. This is something I have been meaning to work out, as since I put sound deadening in my tailgate it doesn;t like to stay up in cold weather!
My brother just fitted new ones to his facelift and delivered in about a week
Ask a simple question, never receive an answer these days
Good delivery time, that!
Still looking ,I have found a company that might be ablue to get some ,they need the part number off the strutts , there is no number on mine .
Anyone help ??
ian
October 2023 fleet status: 100% operational
| Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |
Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.
Lol, I've literally just looked up the part numbers too
Well, I guess there's a possibility of a group buy that could bring a special order price down a bit!
The issue with giving them dimensions, is that we don't know what the stock force rating is? Is it 600N? 800? 400?
The main body is 18mm diameter (which is less than many boot struts, I've seen so many at 22mm). Closed length is 360mm and open length is 510mm. I can't remember if that measurement is pin to pin or end to end, I'd have to check again. /waits a moment
Right, I've had another look, and the distance when fully open between the centre of the ball joints is 507mm. Can't measure the closed length directly, but the 'cleaned' part of the ram is 163mm long, which would suggest a closed length of 344mm, although there may be space for it retract another 5 or 10mm.
Can't read most of the image, but I get the idea.
While the weight of the boot is important, where it lifts it is probably more so as the closer to the hinge it lifts, the more lifting force is required. Might be time to get the bathroom scales and some lengths of wood out!!
Remove a strut and push against a scale to see when it starts closing? Although at 800N that will be getting quite tricky!