ProSpeed Custom Twin Exit Exhaust

[Erni902]

As title I have a rather nice system for sale. Its a custom system made by ProSpeed. Its a twin exit but only has a backbox on the passenger side and the drivers side pipe comes out of this. It was designed this way to get around the lack of space on the drivers side due to the AYC.

I loved this system as its not too loud at all and very subtle to look at. I believe its a 2.5" system.

Now the only issue with the system is that I asked someone to take the cat off and make me a pipe. What they actually did was take the cat out and weld a bit of pipe straight onto the downpipes aswell as the exhaust meaning the system was as 1 from the turbo back. Asked another place cut the pipe out and weld on flanges so the cat could be put back in if needed. What they actually did was cut the downpipes off, fitted my new stainless downpipes and then cut down the decat part of the exhaust and welded a flange on only 1 end meaning that the system is now 1 from the downpipes back. Not a problem if you know a friendly MOT guy but if not or you want to keep your cat then you will need to take it to someone and have them test fit with the cat in place, cut the relevant amount of pipe off and weld on a flange. Shouldn't be too much work for someone with the right tools/know-how.

Due to the modification that is needed I am asking for £80 for the entire system (minus downpipes). This will need to be collected from Northampton due to size and the fact I don't have any packing materials.

Pics to show condition:

20170614_095418.jpg20170614_095445.jpg20170614_095448.jpg20170614_095502.jpg20170614_095513.jpg20170614_095545.jpg20170614_095552.jpg20170614_095557.jpg
20170614_095616.jpg20170614_095618.jpg

Oh forgot to say its off a PFL Legnum VR4 so not sure if it will fit onto a saloon or not, also not sure if it fits FL Legnums. Im sure someone will be along to confirm at some point.

[Erni902]

Bump sfs