Results 1 to 8 of 8

Thread: Custom 260 kmh hi vish dash convertion kit.

  1. #1
    ersanalamin's Avatar

    Offline
     
    Name
    Ersan
    Join Date
    Mar 2005
    Last Online
    21-01-2024
    Posts
    754
    Country
    Other
    Location
    Jakarta
    Car
    EC5A
     

    Custom 260 kmh hi vish dash convertion kit.

    Hi There

    Any body interested in converting VR4 JDM 180 Kmh into custom 260 Kmh Hi Vish dash? I ve design and ordered 3 pc from supplier in Europe for my friend. Swink aka Tomasz has done GB with pretty cheap price in the past but now discontinued so I can not asses the quality of the order.

    Heres some picture of my design

    TYPE 1 - GALANT AT 7000 RPM RESIZE.jpgTYPE 6 - LEGNUM AT 7500 RPM WARNA RESIZE.jpg


    And heres picture some of result

    DSC_1935.jpgDSC_1936.jpgDSC_1944.jpg


    I would say the the quality of the order is very good but still there are room for improvement for the next order. For sure 260 kmh Hi vish layer is customize, but more customization mean more $$$. So I think the picture of the result is optimum customization one can get. Any other minor customization i think is okay. You can propose the customization you want.

    I can offer service to design and create the 260 kmh Hi vish dash conversion as custom replacement kit (AT or MT) that included brand new 180 to 260 kmh calibration 4x2 Pin Chip for 115 GBP + shipping. You have to replace the speedometer chip on your own but should not that hard. As you can see default ODO was set 50K km. Production time frame is about 2 weeks and Minimum order is 10 person.

    Any one interested?
    Last edited by ersanalamin; 14-11-2017 at 06:27 AM.

  2. #2
    ersanalamin's Avatar

    Offline
     
    Name
    Ersan
    Join Date
    Mar 2005
    Last Online
    21-01-2024
    Posts
    754
    Country
    Other
    Location
    Jakarta
    Car
    EC5A
     
    BTW if anyone of you interested in just to buy 260 km brand new calibration 4x2 pin chip only, I can supply it, the price is 30 EUR0 + shipping. So you can buy whatever custom 260 kmh hi vis dial out there. I can also write your current mileage on new chip too

    DSC_1759.JPGDSC_1775.JPG
    Last edited by ersanalamin; 16-11-2017 at 09:31 AM.

  3. #3
    dreamer's Avatar

    Offline
     
    Name
    Jono
    Join Date
    Jun 2005
    Last Online
    23-02-2021
    Posts
    326
    Country
    New Zealand
    Location
    Central Aucklan
    Car
    1998 VR-4 Estat
     
    Quote Originally Posted by ersanalamin View Post
    Hi There

    Any body interested in converting VR4 JDM 180 Kmh into custom 260 Kmh Hi Vish dash? I ve design and ordered 3 pc from supplier in Europe for my friend. Swink aka Tomasz has done GB with pretty cheap price in the past but now discontinued so I can not asses the quality of the order.

    Heres some picture of my design

    TYPE 1 - GALANT AT 7000 RPM RESIZE.jpgTYPE 6 - LEGNUM AT 7500 RPM WARNA RESIZE.jpg


    And heres picture some of result

    DSC_1935.jpgDSC_1936.jpgDSC_1944.jpg


    I would say the the quality of the order is very good but still there are room for improvement for the next order. For sure 260 kmh Hi vish layer is customize, but more customization mean more $$$. So I think the picture of the result is optimum customization one can get. Any other minor customization i think is okay. You can propose the customization you want.

    I can offer service to design and create the 260 kmh Hi vish dash conversion as custom replacement kit (AT or MT) that included brand new 180 to 260 kmh calibration 4x2 Pin Chip for 115 GBP + shipping. You have to replace the speedometer chip on your own but should not that hard. As you can see default ODO was set 50K km. Production time frame is about 2 weeks and Minimum order is 10 person.

    Any one interested?
    I'm keen on a MT Legnum dash shipped to Auckland, New Zealand please.


    Sent from my MHA-L29 using Tapatalk

    1998 Mitsubishi Legnum VR-4 , Manual 2.5L V6 4WD TWIN TURBO

  4. #4
    ersanalamin's Avatar

    Offline
     
    Name
    Ersan
    Join Date
    Mar 2005
    Last Online
    21-01-2024
    Posts
    754
    Country
    Other
    Location
    Jakarta
    Car
    EC5A
     
    No problem Jono,, well 3 person so far 7 to go, any other joiner?

  5. #5
    ersanalamin's Avatar

    Offline
     
    Name
    Ersan
    Join Date
    Mar 2005
    Last Online
    21-01-2024
    Posts
    754
    Country
    Other
    Location
    Jakarta
    Car
    EC5A
     
    okay, already 4 person 6 to go, any other who like to join?

  6. #6
    swinks's Avatar

    Offline
     
    Name
    Tomasz
    Join Date
    Feb 2008
    Last Online
    21-10-2022
    Posts
    4,578
    Country
    United Kingdom
    Location
    Bourne, Lincs.
    Car
    ex-Galant VR4
     
    Well done Ersan. It's really good quality job!
    Ex: Galant VR4
    Running 268 HP ATW and 443 Nm torque at 0.9 bar
    Now: Lancer Evolution 8 FQ-300
    Running 325 HP ATW and 510 Nm torque at 1.6 bar

  7. #7

    Offline
     
    Name
    Rana
    Join Date
    Feb 2013
    Last Online
    22-02-2018
    Posts
    5
    Country
    England
    Car
    LEGNUM VR4
     
    Hi guys can this be done uk speed 180 or jus to 260?

  8. #8
    ersanalamin's Avatar

    Offline
     
    Name
    Ersan
    Join Date
    Mar 2005
    Last Online
    21-01-2024
    Posts
    754
    Country
    Other
    Location
    Jakarta
    Car
    EC5A
     
    Quote Originally Posted by RARE///BREED View Post
    Hi guys can this be done uk speed 180 or jus to 260?
    Just 260 kmh speedo only i m afraid. i m running batch 3 order this week end. you can join if u like, send me PM

Similar Threads

  1. What Subaru turbos are being used for the TD04-13T convertion?
    By Davezj in forum Turbos, Exhaust & Induction
    Replies: 31
    Last Post: 07-04-2014, 03:04 PM
  2. SOLD : Custom exhaust, Custom leather interior, Momo Black steering, Tow bar, Evo alloys,
    By Humpty's Revenge in forum UK Parts for Sale / Wanted
    Replies: 14
    Last Post: 27-07-2013, 12:51 PM
  3. how do i remove tcl ??? (manual convertion)
    By jamez in forum Gearbox / Transmission
    Replies: 21
    Last Post: 12-03-2012, 04:10 AM
  4. Custom Dash Console
    By VR4WGN in forum Interior / ICE (Stereo, Gauges, Seats, etc.)
    Replies: 47
    Last Post: 20-12-2010, 07:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •