i believe the cable you have is open port 2.0 not open port 1.3
openport 2.0 has the pin connected.

have you tryied to use the data logging side of evoscan rather than the actuators side of evoscan.

next time adam is round at mine i will plug my evoscan setup plugged into adams car. to see what happens.
it would be really odd if the actuators only worked with PFL cars.
i have a reflashable engine ecu in my car, it is a MH7202F / H8539F. the facelift ECU is MH7203FA / H8539FA
not sure if the AYC ecu changed from PFL to FL. did the AYC ecu get combined with the ABS ecu in the FL or was it ASC ecu. i cant remeber.

you can never find a Kieran when you need one.