Results 1 to 2 of 2

Thread: AYC Error 82

  1. #1
    Confused's Avatar

    Offline
     
    Name
    Garry
    Join Date
    Apr 2005
    Last Online
    Today
    Membership ID
    714
    Posts
    3,537
    Country
    United Kingdom
    Location
    Notts
    Car
    Legnum VR-4
    My Garage
    Visit
     

    AYC Error 82

    Thought I'd share this - been helping a friend on his recently acquired VR-4, and the AYC wasn't working.

    Pulled the fault codes via Flashy Dash, which gave a single error code - 82 (8 long flashes, 2 short flashes)

    Following the diagnostics in the workshop manual - 27 part 1.pdf - section 27-28, with the help of Google Translate pointing my phone's camera at the screen, it pointed me in the direction of the 60A fuse in the engine bay fuse box (which was OK, and had continuity), then to the AYC relay, which is located next to the battery in the engine bay, inside a rubber boot to protect it from water.

    Upon inspection, the relay was a little bit... corroded on the underneath!!

    PXL_20220826_160745213.jpg

    I suspect this was unbolted, and left laying down near the battery, and water got onto it and pooled, as this is the only way I can think of how this corrosion was able to set in on this corner/edge.


    Swapped it out with another relay, and the pump fired up into life, and error code now gone!


    Hope this helps someone in the future!

  2. #2

    Offline
     
    Name
    John
    Join Date
    Feb 2014
    Last Online
    06-11-2023
    Posts
    133
    Country
    Australia
    Location
    3195
    Car
    Galant vr4 1997
     
    This was the only fault I had when first purchased mine almost 10 years ago. Nick M and Dave where kind enough to point me to this simple fix. Mine wasn't corroded at all but had pitted contacts, easy fix and has never missed a beat since then.

Similar Threads

  1. SRS error
    By CHESHIRECAT in forum Interior / ICE (Stereo, Gauges, Seats, etc.)
    Replies: 8
    Last Post: 10-05-2022, 03:52 PM
  2. Vr-4 error codes
    By macbaileyjr in forum General / Questions
    Replies: 0
    Last Post: 15-10-2007, 09:22 PM
  3. sending pm's error
    By Gly in forum Site Bugs / Issues
    Replies: 0
    Last Post: 24-09-2007, 10:03 AM
  4. Error 500
    By Wodjno in forum Site Bugs / Issues
    Replies: 9
    Last Post: 22-01-2007, 09:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •