E-Manage mapping ideas

[valmes]

Getting ready for summer Right now it's getting a new paint all over

BTW... I had a chance to get my hands on a TD06-20G kit for GTR... well guess what, it just may fit. Really, seems to be even less complicated than fitting Subaru turbos. Nahh... will get my 13Ts running some #s first, only then will think of something else...

Also found that Greddy is now making some injectors for us...
http://www.xenon.lv/en/index.htm?id=...m=1996&to=2000
at least they say they do...

[Kieran]

Brilliant - Thanks Val... I will have a later at them.

And they make very good reading..... I'll digest properly over the weekend.... Thanks again Val!!


And it must be bedtime now...

[valmes]

Here is something interesting... this is a small vb program (created by one of the 3si members) for MS excel that will help you go MAF'less (speed density\MAP) with e-manage Ultimate. It will read logs with your Hz, RPM and boost values and create an Airflow output map for you. Now that process is simple enough. Although you will have to get IAT and Baro pressure signals fixed.

http://home.cogeco.ca/~stealthrims/E...s_Ultimate.zip

P.S.:
2 pezza:
I can't use pager...
If you have a chance to upgrade to ultimate from blue - definitely do it. You will like the fact that it can satisfy some of the demands you might not even be aware of right now.

Best regards,
Val

[Wodjno]

Thus the firing order is a difficult to remember

123456

Which cylinders are which when looking at engine from the front ??

[zentac]

If memory serves

2 4 6
1 3 5

If your stood in front of the car looking at the engine

[Wodjno]

If memory serves

2 4 6
1 3 5

If your stood in front of the car looking at the engine

Good man

[Gly]

07-03-2006, 08:10 PM #83
valmes

back from the dead!

[Wodjno]

07-03-2006, 08:10 PM #83
valmes

back from the dead!

????

[valmes]

07-03-2006, 08:10 PM #83
valmes

back from the dead!

Thread?

[Wodjno]

Thread?

I could see that

I didn't think it needed stating

I posted my question here, as it keeps all this type of info in the same thread, instead of 40000 different threads as a lot of things are cos people don't search enough