Which manual boost controller

[pezza]

As Glenn says watch ya backend on the bends *hmm not best choice of words but hey * With no AYC you will perfect your drift skills to no end

OH... and Wave goodbye to that 270 odd miles from a full tank!

Let us know when you are ready to step up to the table ....

/edit OH and keep that boost gauge needle well away from the red!

[Sports GT]

Question.. What is boost cut set at on the 6A12/6A13...?

[ako]

There is no PSI value for the fuel cut on mistubishis.

6A12 you'll find it around 19-20psi @ 3000, 6A13 around 14psi @ 3000. Higher revs you can get away with more.


Bear in mind, the cut occurs when you hit 115% duty cycle on your injectors in the 6A12, and the 6A13's fuel pump can't handle more than 14psi either.

Food for thought

[nismoevo]

Anyone have pictures when they fit the dawes device on the vr4


Does the stock fuel pump handle 0.9-1.0bar of boost?

[Wodjno]

Anyone have pictures when they fit the dawes device on the vr4


Does the stock fuel pump handle 0.9-1.0bar of boost?

Stock Pump is no probs at 1 bar.. Even 1.2 bar

There are pics on here somewhere and diagrams ?

[nismoevo]

big difference when you upped the boost to 1.0bar?

I think mine is around 0.6bar now manual legnum

[Wodjno]

big difference when you upped the boost to 1.0bar?

I think mine is around 0.6bar now manual legnum

BIIIIIIIIIIIIIIGGGGGGGGGGGGGGGGGGGGGGGGGGGG !!! Diffrence

[shaun1978]

yeah mine turns into an animal when i up it lol

[bennyc1986]

does any 1no wat the safe boost pressure is on a vr4?

[Wodjno]

does any 1no wat the safe boost pressure is on a vr4?

If no other mods.. 12-13psi is a good average

Aslong as your not getting fuel cut that is And not getting large spikes between changes ?