I've found these one:
Loctite 8065 (980C - but it's a copper base grease), here link: http://cgi.ebay.co.uk/LOCTITE-8065-C...item3a58e57ed2
or
DSF-5000 grease (815C synthetic grease), link: http://www.superior-industries.com/d...oduct_122.html
I've found these one:
Loctite 8065 (980C - but it's a copper base grease), here link: http://cgi.ebay.co.uk/LOCTITE-8065-C...item3a58e57ed2
or
DSF-5000 grease (815C synthetic grease), link: http://www.superior-industries.com/d...oduct_122.html
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
Yes i know thread from dead (links dead), but any one find the best solution, copper grease or not?? and where to buy??
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
You can use a product called red rubber grease it does the right job ;-)
http://www.google.co.uk/search?q=red...&client=safari
Good luck
Do not use copper grease it will proper F**k up your callipers
I use a high temp red lithium grease.
Red rubber grease works fine. And it's cheap to boot.
We have just received a few cases of Amsoils very latest Polymeric grease, Its not only heavy duty but won't squeeze out or loose its 'seal' around the pin and carrier. Its now what we strongly recommend for this application; See the tests here http://www.youtube.com/watch?v=bqvq5IHjHTg The price will be £11.50 for a cartridge when I get the price put on the web site in the next day here http://www.performanceoilsltd.co.uk/...ck_grease.html I believe this will finally end everybodys problems here.
If you have a problem with getting Amsoil just contact me on 07949 944523 email don@performanceoilsltd.co.uk or web at http://www.performanceoilsltd.co.uk/
AMSOIL 'The First in Synthetics'
Oh noo, just place big order on opie oils, I pick this product
http://www.opieoils.co.uk/p-999-fuch...lastomers.aspx
can this be use to grease calliper pistons ?
Asking because I gone get this refurbish kit
http://www.seinsa.es/en/productos/pr....asp?Equ=D4427