lower suspension arms part numbers

[bernmc]

Could someone with the parts database (or anyone who has them already) look up the part numbers for the front driver's side lower suspension arms (lateral & compression arms) for the leggie VR4. These are the ball joint bits.

Ta! Need to get hold of a set fairly urgently - don't like the idea of belting down all those country roads with a semi-dodgy suspension!

[Rally205]

Bern it's on my work PC so I'll dig them out tomorrow and pm them to you

[Wodjno]

Could someone with the parts database (or anyone who has them already) look up the part numbers for the front driver's side lower suspension arms (lateral & compression arms) for the leggie VR4. These are the ball joint bits.

Ta! Need to get hold of a set fairly urgently - don't like the idea of belting down all those country roads with a semi-dodgy suspension!

MR972465 and MR972466 Lower Suspension arms.. if this helps.. Not sure which is left and which is right thou ??

[bernmc]

mmm... there sould be two different part numbers - one for the lateral arm, and one for he compression arm, so yours can't be right wodgy.

lets see what marcus comes up with.

[Wodjno]

mmm... there sould be two different part numbers - one for the lateral arm, and one for he compression arm, so yours can't be right wodgy.

lets see what marcus comes up with.

Numbers taken from the Invoice that i received after my Lower Ball Joint Recall work was completed.. These are the Lateral Lower Arm Assemblys

[zentac]

send me your chassis number and I will find the exact part numbers.

[Kieran]

Numbers taken from the Invoice that i received after my Lower Ball Joint Recall work was completed.. These are the Lateral Lower Arm Assemblys

That's for only one set of arms though Wodj.... Bern's not just after the lower arms. He needs both the arms that have balljoints on the end - there's 2 each side of the car.

[Wodjno]

Yes Kieran!! Well Spotted That is why i have stated that these part numbers are for the Lateral Arm Assemblys.. I did not have the compression arm assemblys replaced so i have not got that number..
Isn't some information better than none

[Kieran]

Sorry Glenn... I've been a bit hard of thinking today!
Bern...

Have a look at these threads:

http://www.clubvr4.com/forum/showthr...ight=lower+arm

http://www.clubvr4.com/forum/showthread.php?t=12296

[Rally205]

Ok Bern,

The numbers I have are MR296295 + MR296296 for lateral arms and MR296293 + MR296292 for the compression arms. All four are £141.78 each + vat.

I would need your chassis number to confirm that and I could get a discount on them if you want them.

Marcus

[bernmc]

thanks marcus - mitsi have given me the same numbers with my chassis number. bal is going to check how much he can get them for for me. I'll give you a shout if he can't get them.

Now, I've assumed that it was best to replace both arms at the same time - do you think it's ok just to replace one at a time? It was the lateral arm jt that was creaking (I think - will check).

[Rally205]

It is perfectly ok to replace one arm.