FS: Legnum Super VR4 KYB shocks and springs

[OSiRiS]

FS: Legnum Super VR4 KYB shocks and springs

Taken from my 1998 Legnum Super VR4 with 100,000kms. No problems at all, just been replaced with TEIN system.
Has the following imprinted onto the metal shock bodies:

MITSUBISHI
MR272661
KYB

Some people say that these differ to normal Legnum VR4 shocks and springs. I can't confirm this at all sorry -might pay to ring Mitsi NZ to confirm?

Not leaking at all. All 4 corners.

$200 for entire set.

OSiRiS -021 588 746

[Gly]

dude there just standard vr4 legnum shocks,

not worth alot, the last set on TM went for about $20.

[Strmike]

Hey will these fit in STR no probs same as vr4??might be needing some, but not sure yet just want to check

[Gly]

yeh no probs, but at 100km these are at the end of there lifespan,
and they are exactly the same as what you str has,
i had these exact items in my 25st, (uprated from the factory, kyb shocks with koni springs)

but...

it will cost you round $100 per corner for new ones,

or keep an eye on Trademe, you could get coil overs for not much more,
or be lucky like osiris and get teins for $200,
i got cusco ones for $500,
and You See and got teins with damper adjustemt for $500


if you are after a lowered look, you could also try my old setup

http://www.clubvr4.com/forum/showthread.php?t=15243

you wont need a cert for them

[Strmike]

Sweet as, well im only thinking about them coz i want to sell my STR which has coilovers in it, and i know alot of ppl could be put off by a mod like that(older ppl), so its just incase

sorry to hijack thread ;D

cheers for the help