Depends what you want to do with them..... actual fitting of the lights is easy... in time old 'hayes' fashion fitting its the reverse of removal - one screw/10ml bolt head and one clip and they are out..Originally Posted by HMG1K
You have a few options after that
1) wire them up just as they were with the single fogs and have them look pretty
2) wire the outer lights up with the fogs with a 'slash and hack' job
3) Splice the outer lights into the indicators with 2 4700 uF capacitors wired in parallel to make them work as turn flood indicators. The circuit keeps the relay coil energized when the turn signal is in the off part of the cycle. Once the turn signal is actually turned off, the turn flood light will turn off in about half a second...... However this goes a bit spazzy when you put your hazzard warning lights on
or.... and this is probably the way I'm going to go....
4) Make your outer lights the indicators, and use the indicators as either your sidelights / or volvo style daytime running lamps
any other suggestions?