Innovate Motorsport Web Site http://www.innovatemotorsports.com/
Innovate Motorsports Forum http://www.innovatemotorsports.com/forums/
Tuner Rerources (Videos) http://www.innovatemotorsports.com/resources/lm101.php
Frequently Asked Question http://www.innovatemotorsports.com/support/faq.php
LC-1 Manual http://www.innovatemotorsports.com/s...C-1_Manual.pdf
Whats in the box:
Innovate Motorsports LM-1 Meter (Wideband Controller) Bosch Wideband o2 Sensor o2 Sensor bung and plug Serial cable for PC connection Installation manual Click here to download the LM-1 users manual
CD-ROM with software Cigarette-lighter power adapter
The following software can be used to log all types of inputs. Some sample screen shots shwon below.
Installation and Setup:
Installation of the LM-1 is very simple. The user interface screen is very simple to use and configure to your specifications. Complete Documentation is supplied, and the Support Pages , User Forums and Tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.
Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer.
With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
The instrument can sample and store the air-fuel-ratio and the other sensor data internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included software or any standard spreadsheet program.
Click here to download logworks 2.0
The LM-1's analog outputs can be used for inputs to Dyno software, DynoTune Digital gauges or virtually any brand of Data Acquisition hardware,
such as:
· Accel
· Advanced Racing Technologies
· Advantage Motorsports
· AiM Sports ( MyChron)
· Altronics
· Competition Data Systems
· CORRSYS-DATRON
· Corsa Instruments
· Cygnus Data Star
· DTA Competition Engine Management Systems
· Dynamic Test Systems
· Dynocom
· DYNOmite (Land & Sea)
· EcuTek
· Edelbrock Qwik Data
· EFI Technology
· EFI live
· Electromotive
· Engine Management Systems
· Excalibur Solutions
· Fuel Air Spark Technology (FAST)
· FXL Data
· Haltech Engine Management Systems
· Harrison Engineering
· Holley
· HP Tuner
· HRC
· Microtech
· MoTeC
· Mustang Dynamometer
· Pi Research
· Powertrain Control Solutions
· Powertrain Electronics
· Race Technology
· Racepak
· RPM Performance
· SPA Technique
· Stack
· Stuska Dynamometers
· Superflow
· TAT – Messysteme