I've been busy on the VR-4 this weekend and managed to clear some of the jobs that needed doing ...
First up was the front brake upgrade. I have now fitted my EBC turbo grooved (and dimpled) discs and EBC redstuff ceramic pads. I was able to take my time and gave the brakes a real good overhaul giving everything a really good clean. Also, used my Castrol Red Rubber grease for the sliding bolts and replaced my sliding bolts dust seals on the passenger side (one of the originals was split).
Second was to replace the front exhaust section ("downpipes"). The blowing on my knackered flexi just got too bad so decided to bite the bullet and get a complete new section from Mitsi whilst ordering my new anti-roll bar. As I was ordering so much stuff I was able to get a nice discount ...
Pic 1 and Pic 2 show the new front brakes.
Pic 3 shows the old / new downpipes. Note the knackered flexi ...
Pic 4 shows the new downpipes fitted ...
So, that was Saturday.
Today, I have replaced my rear pads and given everything a good clean up and have bled the brakes all round. Also, have been out to bed the brakes in ... ... First impressions of brakes are good