Where to buy and how much is to purchase the additional radiator for ATF?
Where to buy and how much is to purchase the additional radiator for ATF?
Nevman
...And The Road Becomes My Bride...
There's no direct bolt on job, but any good cooler from the likes of MOCAL, or B&M will do the job. The Spec depends on why you need it. To give you some idea, the standard cooler fitted to the Automatic GLS is around 7,000BTU. The V6-24 is rated at 9,000BTU. The VR-4 one is likely rated higher than this but the japanese service manual doesn't give a specification - so you're going to have to use a bit of guesswork and consider what you're going to need the cooler for.
To give you some idea, I have a Fluidyne super heavy duty cooler fitted. It's huge and is rated at 25,000BTU - BUT... I no longer use the standard ATF cooling system and also I plan to track the car, so I need plenty of overhead.
Tip: Look for ones with 3/8" hose barbs - this simplifies installation as you can then connect the additional cooler in series with the factory one.
Thanks for that.
Do you know what type, where to buy it and rough idea of price for the radiator shown here: http://www.clubvr4.com/forum/showthread.php?t=19516
Cheers