O/S/F driveshaft

[Spirit]

Anyone know where there's one lying around ?

I have another ABS ring knackered, so could possibly make do with just the ring, or indeed the outer CV joint instead.

Why does it always happen just before a Ring trip !!!!

Thanks

Pete

[Spirit]

Am I right in saying this will fit http://www.camskill.co.uk/products.p...m8b73s597p7586 ?

[stuartturbo]

no it does not just put on on MLR forgot to send it back ( pre donny japfest)
you could confirm part number i got is OJ-0619

[Spirit]

Ok thanks Stuart.....a*se

[Paul Beazer]

What you doing to 'em, using them to open bottles of beer?

[Gowf]

I have an outer joint still attached to a shaft off a manual. the inner joint on the shaft collapsed.

If it is what you are after, give me a shout, nothing wrong with outer joint at all.

I'm in scotland at the moment, and so is the shaft, but heading back down on friday, so give me a call on thursday if its of any use on 07828302772

[Spirit]

Thanks mate....how much do you want for it? Is it possible to just get the abs ring off it ?

[bradc]

It isn't possible to get just the ring off, we found that out with Jaimz's car

[Spirit]

Thanks Brad.....thought as much.

So, from looking around I think this is right......is the outer joint the same on an auto as a manual ? I recall a thread from Barry that he mentioned this.

Gowf's is a manual shaft, and of course mine's an auto.

[bradc]

not sure, but we put a facelift manual shaft onto a prefacelift manual. I know that doesn't quite answer the question, but if you find a prefacelift auto shaft, there is a 99% chance it will fit

[BraindG]

Pete, sorry i didnt get a chance to reply.. well.. i couldnt cos my phones been barred - must remember to pay bills.. lol..

Anyways, mine is a gearbox side shaft, and im quite sure they are different in lenght vs the autos one..

i did create a thread.. ill have a nosey for it.. but... mine was swapped out cos it was fecked, so its of no use..

/edit - found article.
Some of the rings can be removed, others can't... Heres my workaround article the shaft I have in the garage is my old buggered manual shaft, with the auto green part.. so it wont be of any use to you

[Spirit]

ok, thanks for the feedback guys......

Mo is having a look for me to see if he has one, Gareth (Gowf) has an outer cv joint if required, and John is asking around...fingers crossed

[BraindG]

just found these - might do for replacing clips?

[Spirit]

Thanks Barry

Yet to hear back from Mo or John yet, but Gowf is sending me the outer CV joint next week.

[Spirit]

Well after Gareth (Gowf) kindly sent me his CV joint, it was fitted yesterday.......but the damn problem is still there !! Gonna do a new thread about it.