getting my boost gauge fitted over christmas, & just considering where to put it !! obvious place would be on top of the dash, but I'd like to keep it more descreet. what do you think? down here? cut into the dash?
getting my boost gauge fitted over christmas, & just considering where to put it !! obvious place would be on top of the dash, but I'd like to keep it more descreet. what do you think? down here? cut into the dash?
Makes sense to me mate - or remove ashtray and feed cables in through there like I did with my Apexi RSM ?
Hello mate, Just want to kwon what these switches are
HKS Super Power Flow + Heat Shield.
Blitz BOV (Super Sound-Dual Drive).
Blitz Gauges id series (boost, oil pres).
Apexi rev/speed metter.
Apexi Turbo Timer.
2,5 inch downpipes-3inch exhaust.
Greddy E-manage.
IC 600x300x76
Super Leggera's
Yokohamas Neova 235/45/17
PRofec B Spec-II.
TEIN S.Tech springs + Koni Absorbers.
Cusco turbo pipe kit.
Black Diamond Front Brakes Disks + Ferodo DS-2500.
which swithces? on top picture?
orange on above the dashlight dimmer is the rear fog light switch..
the others you should already know, perpars the TCL/tracion control one you dont have? INSERT INTO post VALUES (i dont have it)
SUPPORT CLUBVR-4 TODAY!
Please do not PM Moderators and Committee Directly, for quicker response times please follow this guide
HOW TO: Contact Committee or Moderators
My Articles: Fog Light in Rear Cluster - Changing AYC Switch - Changing Drive Shaft - Changing Front suspension
My Projects: Installing Uprated Clutch - making Gauge Pods (Tri-pod)
Club Related: HOW TO Guides - HOW TO: Contact Committee or Moderators
RIP: Type-S - 1998 R - Trigger Mauve - Mauve History | First VR4 - Second VR4 - Third VR4
Get your own fuel sig in the Garage (Members Only) - Visit my Garage ........What Is Geocaching?
These switches runk:
I have TCL. I dont have switch 1,2 and 3.Originally Posted by BraindG
1 - rear fog
2 - immobiliser INSERT INTO post VALUES (i think)
3 - rear demist
3 is front screen heater. [ bottom bit to stop the wipers freezing.]Originally Posted by BraindG
3 is front screen heater, to stop your wipers from freezing.Originally Posted by BraindG
bugger me.. is it?... dont even remember if i have one of those.. and if i do.. i didnt even know thats what it was for :rolleyes: unce:
The flap below switches 2 & 3 is where you want to install your e-boost. Fits very nicely. Just 4 holes to make 2 for the mounting screws, 1 for the wiring loom & 1 for the hose. Don't forget to allow some slack with the hose & the wiring so that you can get to the fuses if need be. Flap shuts flush, visibilty when driving is surprisingly good. A bit tricky to make adjustments, you need to pull flap out INSERT INTO post VALUES (another reason to allow slack with wiring & hose). Boost settings of 45, sensitivity of 9 & 5.5 gate pressure are good starting points. When it's very cold you will get fuel cut out but switching to SP2 default settings INSERT INTO post VALUES (1 press of up arrow) till weather warms is all that is needed.
Good Luck!!!
wadda ya mean ?? I resemble that remark !! :evil1: must admit though, I've really gotta stop! I'm approaching 40 a day. :$Originally Posted by bigdaveakers
without hijacking my own thread, A mate of mine was forced , by his better half, to go to a hypnotist, to stop smoking. he didn't smoke much during the day, [ plumber ] but in the evenings he chain smoked. he was dragged there kicking & screaming, & totally sceptical by the whole thing. 30 mins later, he came out, & has not touched a fag since. thats nearly 2 years ago !! he still wants a cigarette, but "there is something stopping me having one" eerie ?? :shrug:
Yeah - this can work if you approach it with an open mind.
My parents packed in about 10 years ago, without ANY help - which was brave, but meant they were pretty irritable for quite a while!!! :argue:
40 fags a day... just think of the money you could spend on your VR-4 instead! You could get that interior cleaned for a start!!!
What do u find the sensitivity does to the boost? My setings are 47, 10 and 8.0.Originally Posted by borgan
96-97 Mitsubishi Legnum VR-4 Type-S
I found that reducing the sensitivity kept boost in a tight range throughout the revs. With default of 10, boost would drop off at high revs. I'm surprised that you're able to set a gate pressure of 8. The initial pull on WOT must be addictive. Tonight I might try your settings. My mods are very similar to yours so reducing sensitivity might allow me to increase the gate pressure. I must admit that in a previous thread INSERT INTO post VALUES ("what mod shall i get next ?") I was sceptical about setting up a boost controller myself. Probably from reading about the problems people were having with setting up the
AVC-R INSERT INTO post VALUES (BDA excluded); but the E-boost is really quite simple. You can get a huge difference in performance within half an hour and if you go too far the ECU lets you know by cutting the fuel.
First time i've added pics so lets see if I've done it right
Location of my e-boost
Leaving slack on wires allows easy adjustments
sweet Borgan, looks like the right location for me !! must be cold up your way though !!! -19 :-D :-D
looks graet m8, derek have you got yours fitted?
NO More VR4 for me, well ive still got the 6G