Workshop Day Sunday 10th Feb

[bradc]

Please indicate what you want done to your car, or if you'll be attending just to watch. There is more stuff in the shed now so we'll only be able to get in 3 cars, but thats still plenty. I've got millions of sockets, cresents, air compressor, battery charger, angle grinder, 2 axle stands, big engine hoist thingee

There'll be a bbq afterwards, so if you want anything special, bring a plate

And the list of things to be done, I'll update as people post:

Brad: Purple VR-4 rear diff oil change, gearbox oil change, Blue ST-R brake change, calipers, rotors, pads

David: - probably turn up to help, might bring a rattle gun

Sam: - won't be coming, but Det might steal his car and come down to fit the EBC

Ryan: - ayc fluid change

Logan: - change brakes just like on my ST-R

Matt: - replace engine mounts, bringing along trolley jack and axle stands

[Subaru ETA]

i may pop along and give a hand. will confirm closer to the date

[GroundControl]

I have an EBC that I'd like to get installed, however I'm going to be away that weekend

[detonate]

I'll install your EBC GC, let me get my installation bat.

[Ryan]

I'll definitely be there as I need some work done too and would like to help out where I can.

My VR-4 also needs AYC fluids changed

[Subaru ETA]

Ingletor - what work does your car need doing? just the ayc change?

[DefeXion]

Defex

STR to VR4 brake upgrade - callipers/rotors/pads
and a new panel filter, cause of course i need a workshop to do that

[Ryan]

Ingletor - what work does your car need doing? just the ayc change?

Thankfully, yes! For once there is nothing wrong with my car

[Subaru ETA]

i dont know if anyone on here has done a ayc hydroloic change themselves??? well maybe carsten?? i just paid mitsi to do it

[Ryan]

If not then I might have to go down that route as well, it's also what I usually do.

[matt25649]

brad, i'd be keen to come along, want to replace a couple of engine mounts

[Subaru ETA]

if anyone wants me to bring rattle gun etc let me know

[Gly]

well im keen to give the diy ayc change a go if you are Ingletor?
havent done it myself but reading thru the guide it dont look to hard.

i dont think i have any work to do on my car,

rear diff fluid and check my gearbox/transfer case levels are ok after the gearbox repairs

[matt25649]

got some axle stands and a trolley jack i could bring along if wanted

[bradc]

Updated the first post. Logan, we can do one cars brakes first, then swap the cars around and probably get the second one done in half the time

[dickytim]

I'll come out and try and fix the wire I accidently cut for the rear passanger power window at the last day

I'll bring the laptop and Evoscan for a play as well, see who has what fault codes going on

[Ryan]

well im keen to give the diy ayc change a go if you are Ingletor?
havent done it myself but reading thru the guide it dont look to hard.

i dont think i have any work to do on my car,

rear diff fluid and check my gearbox/transfer case levels are ok after the gearbox repairs

Thanks Carsten, I'm definitely keen I'll get the oils from MMC sometime this week. Are there any special tools I need to bring along? I don't have much except a 9000000 piece socket set and some jack stands.

[Ryan]

I'll come out and try and fix the wire I accidently cut for the rear passanger power window at the last day

I'll bring the laptop and Evoscan for a play as well, see who has what fault codes going on

DT, with that EvoScan are you able to manipulate the settings on a standard ECU?

[Kenneth]

hmmm... Will the galant be on the road by then... that is the question.

I need a bonnet and front bumper to get the car registered again... Carsten, when you putting your evo style bumper on?

[SHOWVR]

ill be there.....not sure on what to do though, ill think of something