Will these fit?

[nuster100]

Seen these on fleabay, will the fit a pre-facelift Legnum VR4?

http://cgi.ebay.co.uk/18-alloy-wheels-and-tyres-pcd-5x114_W0QQitemZ200316192384QQcmdZViewItemQQptZUK_C arParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=i tem200316192384&_trksid=p3286.c0.m14&_trkparms=72% 3A1689|66%3A2|65%3A12|39%3A1|240%3A1318

Aso, slightly different question, but am i right in thinking its the hub carriers I need to change for brembo's?

Cheers in advance

JR

[Wodjno]

Seen these on fleabay, will the fit a pre-facelift Legnum VR4?

http://cgi.ebay.co.uk/18-alloy-wheels-and-tyres-pcd-5x114_W0QQitemZ200316192384QQcmdZViewItemQQptZUK_C arParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=i tem200316192384&_trksid=p3286.c0.m14&_trkparms=72% 3A1689|66%3A2|65%3A12|39%3A1|240%3A1318

Aso, slightly different question, but am i right in thinking its the hub carriers I need to change for brembo's?

Cheers in advance

JR

They will fit

But the Tyres are completely the wrong size.. You speedo will read nearly 5% fast.. Also that means you will clock up 5% more miles on the ODOMETER.. And the tyres and all the related mechanicals(bearings,Shafts etc) will wear 5% faster..

Unless you change the tyres that is

Also as they have come of a Civic.. The Load rating will probably be to low for a VR4 also.. It's not listed on the listing..


Cheers

Wodj


PS.. Quite nice wheels though

PPS.. Yes you will need to fit Facelift Hub Carriers to allow you to fit Blembo's

[bradc]

Hmm not sure if they will actually. The centrebore on a VR-4 is 67.1mm so those wheels may not fit on the centre. However the wheels could be designed for a variety of cars and may be around 73mm. I would check that with the seller first.

[GalantOnly]

Hmm not sure if they will actually. The centrebore on a VR-4 is 67.1mm so those wheels may not fit on the centre. However the wheels could be designed for a variety of cars and may be around 73mm. I would check that with the seller first.

Exactly... They will not fit... The bore is too small... VR4s is 67.1 as brad said

[Wodjno]

Exactly... They will not fit... The bore is too small... VR4s is 67.1 as brad said

My Bad !! I read it as 67.1 !


Also as Brad says, they are Multi Fit Wheels and may have Bore size larger than that advertised .. The use of different sized spigot rings for different bore sizes are used.. Being that they have a PCD of 114.3, i would have thought they would have been manufactured to fit the largest bore size for that PCD

But best check with buyer a stated above ..


Cheers


Wodj

[nuster100]

Cheers, I have fired off an e-mail to him, see what he says

JR