**Urgent Help Needed**

[adzgti]

Hi guys,

Please oh please oh please help me.......

I currently have my car in bits whilst fitting my Greddy Profec E-01 Boost controller.

I've got all the major conponents fitted however I thought I'd have enoght time to sort out my RPM pick up after....how wrong was I!

The light has nearly gone now and I really need to get this sorted asap. I can see the ECU and the wiring (I know that the RPM pick up is pin 8 in the 12 pin connector) but i need to splice into this for a pick up. I cant get the wiring connectors out of the ecu....its far too tight and I have no skin left on my fingures now!

question is.....Does anyone know what colour, pattern ect that the RPM pick up wire is? This would save me a lot of time and agro if someone could help me out.

Thanks in advance

Adz

[Kieran]

Ooooh Gawd, I've no idea from the top of my head.... :

But this post should help you!!

http://www.clubvr4.com/forum/showpos...9&postcount=27

[Kieran]

Actually, this post may be better, and slightly easier to read:

http://www.clubvr4.com/forum/showpos...64&postcount=1

[adzgti]

Thanks very much, i'll give it a go.

Just got the unit all linked in minus the RPM however the screen lights up but doesnt display any information??????

Can anyone shed some light on this for me?

[adzgti]

Kieran, sorry for being dumb but can anyone shed some light on what Pin the RPM pick up is? is it the speed pulse or similar?????


Cheers

[peter thomson]

It's in the 3rd block from the left hand side and the 2nd pin on the bottom row. The plug you are looking for has 12 pins

[adzgti]

Thanks Peter for that....I thought it was, I just needed a second opinion before I start splicing things.

I just hooked up the Boost soleniod to get the car running. Had a bit of a nightmare with the controller as it didnt want to work at first, so I moved the ground and hey presto, it worked

Took the car for a drive and everything seems ok. just left the settings at AUTO will play with it more when I have the time. Oh and Peter, I forgot about those seals.....sorry

[peter thomson]

Thanks Peter for that....I thought it was, I just needed a second opinion before I start splicing things.

I just hooked up the Boost soleniod to get the car running. Had a bit of a nightmare with the controller as it didnt want to work at first, so I moved the ground and hey presto, it worked

Took the car for a drive and everything seems ok. just left the settings at AUTO will play with it more when I have the time. Oh and Peter, I forgot about those seals.....sorry

Glad to hear it's sorted and no problem with the seals.