EDFC pinout?

[Davezj]

does anyone have the pinout for the 3 connectors on the back of the control unit.

the bottom right and left are for the motors and i can get them later if necessary, but it is the center power connector i need for now.
there are 4 pins

perminent 12V.

accesory 12V.

illumination power (12v i think).

ground.

but i don't know which pin is which.
i have a controller and i want to power it up to check it works. before i go out a buy the motors the power harness and the motor extention harness for tein.

[V6-24]

here you go

there are 4 pins

perminent 12V. YELLOW

accesory 12V. RED

illumination power (12v i think). GREEN

ground. BLACK

[Davezj]

cheers for the pic,
the center connector seems to ba layed out with the GND on the right (black) i will have to play with the others to work out which is which.

[V6-24]

from left to right:

YELLOW perminent 12V.

RED accesory 12V.

GREEN illumination power.

BLACK ground.