Side -Wall Sub Box

[VR4WGN]

well another project completed finally and here we are!! the end result.
this box was totally designed by myself to maintain MAXIMUM boot space while housing a sub box.

alot of hard work but i finally have it and its awsum.
fully carpetd and self supportive

houses 12" Sub and an amp underneath(so no one can touch it)
and Strut braces will still fit and so does the boot cover
enjoy

[scott.mohekey]

That is very nice Q!

[xt4t1k]

Wow thats awesome.

[bradc]

Cool

[starky]

Very nice indeed, such a nice feeling when you do it yourself and it turns out looking like a very tidy install. It looks like it came from the factorylike that, I did a similar thing in my old vectra but I mounted the amps so you could see them but they where flush fit so know one could adjust them I also made a false floor so I could get at the spare easy without removing the sub box




I have been thinking about doing something similar in the leggy

[WildCards]

Impressive, is it something you're putting into production or a one off?

[VR4WGN]

Starky hats very nice man,but in the real orld amps are visible theft magnets lol,but never the less very nice

[VR4WGN]

Impressive, is it something you're putting into production or a one off?

thanx man,um i designed it and templated it for production for all you club boys wanting a near factory looking self install kit with MINIMAL work required to fit

[VR4WGN]

i am going to design a discreet style grille for it awsell,just contemplating laser cut or round stainles bar shaped to some style

[Atik]

Oooh, nice.

I have half a fibre glass mould of the inside of that same wheel arch area waiting to be finished. Project was put on hold cos I didnt have a circular saw to chop the 18mm MDF in a straight line! And two wears later, I still dont have a circular saw!

Q, if you sell these, I'd be interested in one built for a 12" sub. I will be installing a rear strut brace soon and my current box wont fit flush to the rear seats anymore cos of that. Top work

[bigsed]

Very nice, way better than my effort

[Turbo_Steve]

Q, does that sit with it's back to the boot trim, or do you remove this and fit it to the bodywork?

I only ask as I really want a sub, but need to retain as much boot space as possible....

I'm a really picky bugger, me...

[taupodrifta]

are you doing one for the other side aswell??? i want something like this but my car is running 2x12s

[VR4WGN]

Oooh, nice.

I have half a fibre glass mould of the inside of that same wheel arch area waiting to be finished. Project was put on hold cos I didnt have a circular saw to chop the 18mm MDF in a straight line! And two wears later, I still dont have a circular saw!

Q, if you sell these, I'd be interested in one built for a 12" sub. I will be installing a rear strut brace soon and my current box wont fit flush to the rear seats anymore cos of that. Top work

lol i think we all have them 2 year projects lying around lol,like my fibreglass dash surrounds,theyv been sitting since cancer and i have only got round to it lol

[VR4WGN]

Q, does that sit with it's back to the boot trim, or do you remove this and fit it to the bodywork?

I only ask as I really want a sub, but need to retain as much boot space as possible....

I'm a really picky bugger, me...

hey man,i was waiting for your view lol.. um i know youre picky and theres nothing wrong with that.
now i have designed the box to withstand most of the factory padding,the only thing you need to do is remove the sidetray,and shop out the sidewall pocket, i will however sell the sub box with a how to fit guide.
tox hs been designed to keep maximum bootspace, im a surfer so i need to fit anywhere from 1-5 surfboards in the boot plus wetsuits so yes it only take up that lil side pocket area ,the rest sits in the sidewall of the body.
the sub itself is recessed to clear the spare wheel flap aswell,i am still thinking of a designer style grille for the box,discreet but good looking aswell

so input will be great.

plus i will also sell the sub boxes dis-assembled for cheaper freight o

[VR4WGN]

are you doing one for the other side aswell??? i want something like this but my car is running 2x12s

yes im doing a twin setup for a customer whom bought a legnum form me.

but he has a viento,now i say this cos you have AYC!! so the box will not fit there due to the tank

[taupodrifta]

yes im doing a twin setup for a customer whom bought a legnum form me.

but he has a viento,now i say this cos you have AYC!! so the box will not fit there due to the tank

I will soon be taking the ayc out and going open diff. You got any opens lying around by any chance

[VR4WGN]

hahahahahhahahaa i wondered lol... um i have yes,i have 1 left but i might be putting it into the black vr4 on monday,i have a lsd from a type-V but Adam Finlay form ch ch is buying it i think,i can however get you one tho,anytime

[Atik]

Any development on this one? Worked out a possible price for shipping to UK?

If it works out ok, I am definitely interested in one. Otherwise, might have to try to finish fabricating my old one!

[VR4WGN]

yea man we worked out the pricing and its not cheap.
remembering Custom =$$$$ ay,orks out to $450+ for the custom box with the face plate and carpeted