Transfer box

[wooly05]

Hi all, can anybody help me out? i'm looking for the backlash clearance specs for the transfer box. I've got an 01 vr-4 that has just run the bearings in the transfer box. I found out mitsubishi dont sell any internal parts for the transfer box so I have oversized the bearings and machined the casings to suit, thus having more heavy duty and quieter bearings, I'm ready to put it together now and would like to set it all up properly with factory clearance. Any help appreciated.

[Nick Mann Services]

Wow! That is a serious first question. I'm sorry I can't help - that's info I haven't seen before. Welcome to the club and good luck.

[Nutter_John]

the box is the same as an Evo 4-6 xfer box , so this info may be more available via an evo channel

[wooly05]

thanks guys, I plan on becoming a paid member as soon as I have sorted this out, if anybody wants the bearing sizes I used give me a shout. Cheers

[nuster100]

Im about to rebuild my transfer box, any advice would be appreciated.

Jay