I just dropped off my car to Eurospec for a full ECU reflash on my car. Thought I could keep a thread posted with progress and updates and hopefully some good results.
The car, in case you dont know it, is a manual converted Legnum VR4 (260ps). Was fitted with an E-Manage Blue (piggyback ECU) and boost controller... and a whole load of other bits and bobs. The last dyno run showed the car running at 0.8bar boost, managed 223.5bhp at the wheel and 287.4bhp at the flywheel.
I had since 'lost' my ECU map and was running back on stock ECU settings and managed to up the boost to 1bar (but with no way of monitoring AFR and knock etc, I backed off to 0.9bar) and the car felt super quick.
So fingers crossed, Ben can work some magic and get my car to reach the 300bhp point.
[See how I used a very appropriate thread title, to aid in possible future searches]