Where do you get your parts from?

[welshman010]

Hi guys\girls,

I have a 52(2003) galant 2.5 v6, trying to find a site online to buy parts. Looking for both front wiper arms. Car is mint apart from wiper arms are corroded. Can anyone recommend one.

Curiosity to alot of other parts from other Mitsubishi models fit on the galant.

Thanks

[elnevio]

All 8G Galant wiper arms are interchangeable as far as I know. So your best would be a breaker on here!

Mine started to go - so out came the satin black spray paint, some patience, and a few thin coats - and good as new!

[WildCards]

Have you tried www.camskill.co.uk?

They won't/don't have everything, but they have come up trumps for some stuff over the years.

[welshman010]

Have you tried www.camskill.co.uk?

They won't/don't have everything, but they have come up trumps for some stuff over the years.

Thanks. No luck but will save that.

All 8G Galant wiper arms are interchangeable as far as I know. So your best would be a breaker on here!

Mine started to go - so out came the satin black spray paint, some patience, and a few thin coats - and good as new!

Will try myself, just looking where i can get a set if it comes out looking crap.

[giblet]

All 8G Galant wiper arms are interchangeable as far as I know. So your best would be a breaker on here!

Mine started to go - so out came the satin black spray paint, some patience, and a few thin coats - and good as new!

one of mine is corroded in a small area, so whilst i was giving the car another coat of wax yesterday i just coloured it in with a black marker as a temporary fix!

[elnevio]

Well, the part numbers for the wiper arms on mine are: MR275954 (driver) & MR275955 (passenger).

You can still try sending an email to Camskill - they can get a lot of things that aren't listed on their website. Might be worth checking Mitsi mean stealership - you could be surprised - otherwise a motor factors might be able to give you a price.

[aboo]

With all the Vr4 & Gallant I have seen most have this problem.

[Johnny_Cashed]

Yep, same with my Galant. As Nev said I took mine off, sprayed them black and then lacquer over the top. They will probably need doing properly when I have the time but they look fine for now.

[welshman010]

Think I give it a go tomorrow

[Scanny]

mine corroded on my old galant and they are as bad on the GDI. i would just colour them if i could be bothered

[welshman010]

one of mine is corroded in a small area, so whilst i was giving the car another coat of wax yesterday i just coloured it in with a black marker as a temporary fix!

Nice temp fix. Will do for now. Thanks

[bluemooney]

I got my wiper arms for the mx6 powder coated cost 20 quid better than new

gaz

[steelie600]

mine have been done in satin black same as my canards