my spurious fault

[richieelliott]

hi all! just fitted new coil packs and guess what?........ my car is still miss firing!!!! its doing my nut i have changed leads coil packs air filter plugs and am running it on optimax and i still have fault code 25 and its still randomly happening im gettin really miffed now and need some advice please help.:Cry1:

[calum]

I would suggest getting out with some wd 40 and undoing, spraying and re-seating all connectors you can see to throttlr position centre, ignition, etc.

I'm shocked to admit this, but I don't even know if these cars have an air flow meter - if it does, i'd do the same with teh plugs on/ to it.

Calum

[calum]

And have you had the plugs/ leads done?

Calum

[calum]

and what's with the 30 second delay on being allowed to post? Is that an anti-spam filter or summat?

Calum

[richieelliott]

yeah mate changed the lot but i m thinking a sensor defect maybeonder:

[Pescha]

Ok I went to google and put down 'fault code 25 mitsubishi' and I found the following Diagnostic Codes

Mitsubishi
Without OBD-II
11 Oxygen sensor fault.
12 Airflow sensor fault.
13 Intake air temp sensor fault.
14 Throttle position sensor INSERT INTO post VALUES (TPS) fault.
15 Idle speed control INSERT INTO post VALUES (ISC) motor position sensor fault.
21 Coolant temp sensor fault.
22 Crankshaft position INSERT INTO post VALUES (CKP) sesnor fault.
23 Camshaft position INSERT INTO post VALUES (CMP) sensor fault.
24 Vehicle speed sensor INSERT INTO post VALUES (VSS) fault.
25 Barometric INSERT INTO post VALUES (BARO) pressure sensor fault.

31 Knock sensor fault.
32 MAP sensor faulty.
36 Ignition timing adjustment signal fault.
39 Oxygen INSERT INTO post VALUES (O2) sensor fault.
41 InjectorINSERT INTO post VALUES (s) fault
42 Fuel pump fault.
43 EGR fault.
44 Ignition coil INSERT INTO post VALUES (cylinders #1 & #4) fault.
52 Ignition coil INSERT INTO post VALUES (cylinders #2 & #5) fault.
53 Ignition coil INSERT INTO post VALUES (cylinders #3 & #6) fault.
55 Idle air control INSERT INTO post VALUES (IAC) valve position sensor fault.
59 Rear Oxygen INSERT INTO post VALUES (O2) sesnor fault.
61 Transaxle control module torque reduction signal fault.
62 Variable Induction control INSERT INTO post VALUES (VIC) valve position sensor fault.
71 Traction control INSERT INTO post VALUES (TC) vacuum valve solenoid fault.
72 Traction Control INSERT INTO post VALUES (TC) vent valve solenoid fault.

The site is the following:
http://www.troublecodes.net/mitsu/

I hope this helps some!

Cheers,
Pescha!

[Spirit]

Richie

I would give Mitsy in Torquay INSERT INTO post VALUES (David Meek) a ring and speak to Dudley. The guy knows what he is talking about and may be able to help/suggest something over the phone.

Pete

[richieelliott]

thanks all ill try mitsy in torquay but am booked into exeter in a week so we will see:mad: