fto alloys

[ljc100]

Hi guys,i have a pfl vr4 it has the standard alloys,i was thinking about painting them Black to suit the Finnese Green but i have just been offered a very cheap set of 17" from a fto would these fit?

[elnevio]

Hi guys,i have a pfl vr4 it has the standard alloys,i was thinking about painting them Black to suit the Finnese Green but i have just been offered a very cheap set of 17" from a fto would these fit?

Check the offset. Otherwise, I believe all FTOs have the 114.3x5 PCD, so the wheels should bolt straight on.

[bradc]

Yep they should fit fine. The rolling radius of the tyres might be too small though, what width and offset are the wheels, and what size are the tyres?

[Nick Mann]

I've seen Evo wheels on an FTO, so the potential is there.

[stuey]

I'm sure I sold my old BBS VR4 wheels to a guy with an FTO so it's pretty likely. AS mentioned already just check the offset will work

[bradc]

Indeed, there is an FTO in Auckland with EVO 7 wheels on it and they look brilliant.

[ljc100]

Indeed, there is an FTO in Auckland with EVO 7 wheels on it and they look brilliant.

Thanks everbody for your input a little more info wheels are 5x114 et 35 tyres 225/45/17,are they a straight swap?

[pezza]

Shouldn't be a problem with that spec

[elnevio]

Indeed, they sound spot on.