Anyone know who in the UK would be best positioned to supply me a stock Greddy item?
Its a Greddy Oil temp sender, the kind that replace the sump plugs etc
Cheers
Mike
Anyone know who in the UK would be best positioned to supply me a stock Greddy item?
Its a Greddy Oil temp sender, the kind that replace the sump plugs etc
Cheers
Mike
Still here somewhere........
Haven't Greddy gone tits up ?
They only list the oil sensor via a sandwich plate jobby, maybe i need to drop them an email.....Originally Posted by Wodjno
either that or i find someone in the US to order it and post it on!
I always used to use Funky Products / Funky Styling but I havn't used them in a while. Just done a search & looks like they have gone bust but they do recommend jdmperformance.co.uk on their site. Might be worth a look
Speak with Dave at Rspec , he sells sensors so may know which ones work with Greddy etc
If you mean oil temp sender in a sump plug, you don't need Greddy one.
I have VDO one, works great:
http://cgi.ebay.com/ebaymotors/VDO-S...Q5fAccessories
It's just few quid, and does the job
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
have you asked Ben at eurospec i thought he had some dealing with them
"Finishing second means you are the first person to lose"................ (Gilles Villeneuve)
its specific to Greddy gauges, ie there is a harness plug lying empty waiting for the sender, wire and plug which is all one system
Try NR Autosport in Lincs
Evo specialists and suppliers of 'stuff'- very good rep and may be able to help
None of the main suppliers have been able to help....Rspec etc etc
I have since found the old harness and wondering is it resoldable?
Did u try GGRacing Mike ?Originally Posted by miller
no help as i dont have a part number. If i could read Japanes then the Greddy handbook i have might offer up some clues!Originally Posted by Wodjno
Patrick at RHD Japan sorted this out in the end. It was no problem to him to help with part and part numbers. Whereas others werent interested without a part number.
Cheers RHD!