anyone got these and do they fit bang on?
17s gunmetal btw
any pics with them on would be super.
anyone got these and do they fit bang on?
17s gunmetal btw
any pics with them on would be super.
youtube "tha got beef wi me"
i made that.
http://www.clubvr4.com/forum/showthread.php?t=24485
It's a white saloon, so the fitted picture is not the perfect match for you, but it proves the fitment!
wow, ta for the quick reply, so they fit straight on.
Any idea how much I should pay, 1 has a bit of a scuff on the outer edge and they have 2 good tyres avon and 2 just legal summat else?
Dammit! Forgot I was signed in as a greenie!
Dunno on value? Evo alloys in dodgy condition only seem to be fetching £100-£150. Make sure they are round before you buy - everything else is fixable. Refurbs for £35-£50 a wheel and rubber is an ongoing expense anyway.
thanks nick, ill have a pop at them i think.
All evo 4-x wheels fit perfectly, and everything from 5 upwards also clears brembos
If I'm replying to your thread and helping you out, it is because I like you and want to help out your VR-4 ownership. No other reason
anyone know if these will fit over brembos?
They look like Evo 4 wheels which are 16". I don't think you'll get Brembos inside those.
'97 Manual Legnum in silver with some subtle mods
My first VR4 - '97 Legnum Dark Green & mean ...it was love at first sight - now sold
Thank you for the info.
Will these be too big and rubby?
https://www.ebay.co.uk/itm/184848832...8AAOSwJbhgu3RN
what about these?
Rota GR6 Alloy Wheels, 18 x 7.5 inch, 5x114 PCD, ET45
Last edited by jahooli; 06-07-2021 at 05:51 PM.
October 2023 fleet status: 100% operational
| Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |
Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.
Thanks for the response, had the disks, breaks and lines for a while but finding it harder to find wheels than i thought it would be. Been offered some off an evo 8, look like yours i think but no tyres. Might be a safe bet tho. I have an option to go new, just hard to ask the dealer if they fit as converted (not yet) Legnum!
I love these...https://www.lkperformance.co.uk/whee...ze?vehicle=863 dont know if those will fit tho!
If the forum does not get too annoyed I might be posting a lot of "will these fit"!
Cheers Nev
Paul
i30N wheels, they do look nice! 18"x8" wheels with an ET of +45. That might cause rubbing/catching as they are pushed into the car more. 8"-wide Evo wheels have an offset of about +32 (IIRC) and might also mean they don't clear Brembos. But this could possibly all be solved with 10mm spacers.
Too expensive to have a go, if they dont fit ill end up in the knackers yard!
if i KNEW they would fit I might have a pop.
I am pretty sure my Evo wheels are 18x8 with a 38 offset. Spoke design makes a difference on Brembo clearance, however I do not have 7mm clearance, so you'd almost certainly need spacers.
So they could be a possibility with spacers?
Do spacers have detrimental effects and how big can you go?
Wheel arch issues?
Many thank you's
Paul
Spacers reduce the amount of thread that your wheel nut will thread onto. At 7mm I'd be researching the need for longer studs. Other than that as long as the wheel is sat in the right place I'm not sure there is any other issue?
/edit: You'd also want to make sure that the spacer holds the wheel in the right place - the hub has a flange that holds the wheel concentrically to the hub, just the studs alone won't do that and the wheel will feel out of balance all the time.