Carbon covers

[Skydiver]

Thanks Peter! I got the carbon cover yesterday and I'm more than happy with it. It came to the post office few days ago so it came pretty fast to Finland but I didn't got the time to get it until yesterday. I'm pretty sure that this part wasn't the last part I buy from You since the quality of your work is so good. Thanks!

[crazyken76]

Photo0362.jpgPhoto0361.jpgPhoto0360.jpgPhoto0364.jpgPhoto0365.jpgPhoto0367.jpgPhoto0366.jpg this is the carbon work that pete done on he,s vr4

[peter m]

thanks for that ken

[phosty]

The carbon clock cover is interesting (I already have the fake carbon console and gear surround) - I have two 52mm dials there currently in place of the closk but the stock cover obscures the top of the dials from my seating position. Now if you were able to fashion a clock cover with a bit of a swell to fit two gauges there that would be perfect?

Three dials would be even better - but that means carving the dash to fit them under and you wouldn't be able to use the same clip slots to hold it on.

[peter m]

The carbon clock cover is interesting (I already have the fake carbon console and gear surround) - I have two 52mm dials there currently in place of the closk but the stock cover obscures the top of the dials from my seating position. Now if you were able to fashion a clock cover with a bit of a swell to fit two gauges there that would be perfect?

Three dials would be even better - but that means carving the dash to fit them under and you wouldn't be able to use the same clip slots to hold it on.

there is always a way around everything the clock them selfs could be taken away a carbon pod could be made to fit the hole, the little clips that holds the clock in place could then be bonded to the pods under side then would just fit the same as the clock

how much higher would it need to go as i will take a look at this when i start on my vr4 list in a months time and i would have to sweet talk ken in to letting me play a round with his car

i will get ken to put a pic of a evo pod i am doing to show what i could put in place

[peter m]

thanks for the feed back guys

i am still making the covers to order at a cost of £120 free post to the uk £15 to nz oz

i am just finishing work on the new cover mould as the old one has had about 80 covers from it and needed reworking i have just gel coated it and it will be ready to go in about a week

i have a list on the go as well so if anyone is after a cover drop me a pm and i will add you to it

the covers will be going on ebay soon at a higher price but you guys on the site will still get them at £120

work is going to start on more carbon bits for the vr4 over the coming months

thanks peter

bump

[peter m]

i am back lol

[exevoowner]

Ello peter

[Buzz Fuzz]

i am back lol

This means the CF engine covers are back too?

[peter m]

This means the CF engine covers are back too?

they are mate

[aboo]

Welcome back Peter.

[peter m]

Welcome back Peter.

thanks andy its good to back

[Buzz Fuzz]

What is the reason for your return?

Even in Holland you're famous..

[elnevio]

Nice one Peter, welcome back!

[666damned]

Hey up pete....good to see u back m8

[peter m]

What is the reason for your return?

Even in Holland you're famous..

i had no time with work and home life so i shut down , its only now i am getting my time back and i am starting to go nuts need something to do lol , and i love making the covers

[LudviG]

Welcome back Peter! Good to know your work will be avaible again

Sent from my GT-I9300 using Tapatalk 2

[mitsuchick]

i hope he's still making these!

[Gingerfish]

i hope he's still making these!

He hasn't been online for 7 odd months now and there are a few people that have tried to contact him for various reasons.

If I could get the molds off him, I'd probably have a go at continuing this line of accessories and kits. I'd love to make a full kit in Carbon Fibre. I think that'd look pretty sweet!